467107
185
Zoom out
Zoom in
Previous page
1/200
Next page
185
Programming example: F3A model
“FAIL-SAFE settings”
We strongly recommend that you make use of the safety
potential of this option by at least setting the throttle
position (glow-powered models) to idle, or the electric
motor to stop, if a fail-safe event should be triggered.
This simple precaution ensures that the model is much
less likely to create havoc and cause property dam-
age or personal injury. If you also program the fail-safe
positions of the control surfaces in such a way that the
model flies steadily descending circles in case of inter-
ference, then you have a good chance that it will land
relatively gently even if the radio link fails for a protracted
period. This also gives you plenty of time to restore the
connection, should the whole 2.4 GHz frequency band
suffer interference for a while.
In the receiver’s default state, however, the servos
remain in their last valid position (“hold mode”) when in-
terference occurs. You can program any individual servo
output of your receiver to a “fail-safe position” (fail-safe
mode), as described on page 136.
Summary
The settings described on this page are intended
primarily for the expert flyer. Please bear in mind that
refining the flying characteristics of a model aeroplane
to this extent involves tremendous effort, time, sensitivity
and expertise. Some experts continue the program-
ming procedure even when they are flying, although it
is not advisable to try this if you are just a moderately
advanced pilot making your first attempt with an F3A
aerobatic model. You would be well advised to request
help from an experienced pilot, and carry out the fine-
tuning adjustments mentioned here one by one, with the
expert at your side, until your model exhibits the neutral
flying characteristics you desire.
185


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info