Manual Graupner MX-16 HoTT (page 147 of 200) (English)

467107

147

Zoom out

Zoom in

1/200

147

Program description: Telemetry menu

The receiver servo sockets are addressed in se-

quence; this is recommended for use with analogue

servos. At this setting the servos are automatical-

ly operated at a frame rate of 20 ms (30 ms with the

twelve-channel receiver, Order No. 33512) - regard-

less of what is set or displayed in the “PERIOD” line

of the “RX SERVO” display.

SAME•

RX SERVO TEST

ALL–MIN : 1000µsec

ALL–MAX : 2000µsec

ALARM VOLT : 3.8V

ALARM TEMP–:–10°C

ALARM TEMP+: 55°C

TEST : START

CH OUT TYPE:SAME

The receiver servo sockets are addressed in parallel

blocks of four, i. e. channels 1 to 4 and channels 5 to

8 each receive their control signals simultaneously.

This is recommended for use with digital servos, and

especially where multiple servos are employed for

a single function (e. g. ailerons), to ensure that the

groups of servos run absolutely synchronously.

If you are using digital servos exclusively, it is advis-

able to set a value of 10 ms in the “PERIOD” line of

the “RX SERVO” screen, as this enables you to ex-

ploit the fast response of digital servos. If you are us-

ing analogue servos, or a mixture of both types, it is

essential to select “20 ms”!

If you choose the faster setting, please take par-

ticular care when selecting the receiver power

supply: since up to four servos can start moving si-

multaneously, the load on the battery is fairly severe,

so it must be a high-performance type.

SUMO (Sum signal OUT)•

RX SERVO TEST

ALL–MIN : 1000µsec

ALL–MAX : 2000µsec

ALARM VOLT : 3.8V

ALARM TEMP–:–10°C

ALARM TEMP+: 55°C

TEST : START

CH OUTPUT TYPE:SUMO

A HoTT receiver conﬁgured as SUMO constant-

ly generates what is known as a sum signal from the

control signals of all its control channels, and - in the

case of the GR-16 receiver supplied in the set as

standard - makes this available at servo socket 8.

If the receiver’s display shows a two-digit number to

the right of “SUMO” …

RX SERVO TEST

ALL–MIN : 1000µsec

ALL–MAX : 2000µsec

ALARM VOLT : 3.8V

ALARM TEMP–:–10°C

ALARM TEMP+: 55°C

TEST : START

CH OUT TYPE:SUMO 08

… then the active ﬁeld shifts to the right - to channel

select - when you conﬁrm “SUMO” with a brief press

of the central SET button of the right-hand touch-key.

This choice determine the highest of the transmitter

channels contained in the SUMO signal:

RX SERVO TEST

ALL–MIN : 1000µsec

ALL–MAX : 2000µsec

ALARM VOLT : 3.8V

ALARM TEMP–:–10°C

ALARM TEMP+: 55°C

TEST : START

CH OUT TYPE:SUMO 08

You can conﬁrm the pre-set number with a further

brief press of the central SET button of the right-hand

touch-key, or use the arrow buttons to select one

of the other channels between 04 and 16, and then

conﬁrm your choice with SET.

The receiver outputs are addressed in sequence at a

frame rate of 20 ms (30 ms with the GR-24 receiver,

Order No. 33512), even if you have set 10 ms in the

“PERIOD” line of the “RX SERVO” screen page.

Although primarily intended for “satellite mode” with

two HoTT receivers, as described below, the sum

signal generated by the receiver deﬁned as SUMO

can also be used, for example, to control a ﬂybar-

less system, or to control a ﬂight simulator (using the

adapter lead, Order No. 33310).

In …

Satellite mode

… two HoTT receivers are inter-connected using a

three-core connecting lead (Order No. 33700.1 (300

mm) or 33700.2 (100 mm)) using servo sockets de-

termined according to the speciﬁc receiver types. For

example, GR-16 and GR-24 receivers are inter-con-

nected using servo output 8. For more details on this

please refer to the Internet at www.graupner.de.

All channels of the HoTT receiver which is conﬁgured

as SUMO, and is deﬁned as the satellite receiver, are

constantly transferred to the second HoTT receiver -

the primary receiver - via this connection. The prima-

ry receiver must be programmed as the …

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner MX-16 HoTT Manual

Product: