467107
51
Zoom out
Zoom in
Previous page
1/200
Next page
51
Backing up receiver settings
the process is complete, this message appears:
Click on “OK” to close the window.
You can now reset the receiver to the default settings,
as mentioned earlier and described on page 44.
Copying a data set to the receiver
You can re-load the backed-up data into the receiver
using the “File Load” function of the Receiver Setup
program.
The first step is to connect the receiver as described
under point 3 “Reading out receiver data”, and click
on the “Connect” button. Assuming that the receiver has
been previously initialised, the program reads out the
default settings.
Now select the desired “rdf” file from the appropriate
folder and click on “OK” in the “File Load” pop-up win-
dow. Click on the “Write” button to transfer the data to
the receiver connected to the PC.
When the data transfer is complete, the pop-up window
“Receiver Data Write Success” appears.
Finally you can click on “OK” to confirm the action, then
on the “Disconnect” button to disconnect the Receiver
Setup program from the receiver.
Important notes:
The “Receiver Setup” program includes addition-•
al functions which are currently still in prepara-
tion; they must not be used at present. You can
find out about the latest state of the software in
the Download area for the mx-16 on the Graup-
ner website.
A separate manual for the whole “Firmware_Up-•
grade_grStudio_Ver-X.X” program package is in
preparation, and will be updated constantly as
soon as new options are available.
Important:
The active connection is terminated using the “Dis-
connect” button, but you should only do this if you
wish to initialise the receiver directly, as described on
page 44 or 48, and do not wish to overwrite it with a
data set you have already saved.
Saving receiver data4.
The “File Save” button backs up the current servo
configuration on the PC.
The Windows “Save as” dialogue now opens:
First select a folder of your choice in which to save
the file, and enter under “File name” an appropri-
ate and unambiguous name, so that you can easily
find the file again at a later date. The program auto-
matically appends the file suffix “rdf”. The data set is
backed up when you click on the “Save” button. When
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info