467107
27
Zoom out
Zoom in
Previous page
1/200
Next page
27
Description of transmitter
RF
MUST BE
OFF
OK
… appears, then the transmitter’s RF section is still
active. Switch this section off in the “RF module” line
of the Base settings menu, and repeat the proce-
dure.
If the warning …•
SD-CARD
INSERT
OK
… appears, then there is no memory card in the card
slot, or the card cannot be read.
If the Select window is empty …•
FILE LIST
… then the transmitter cannot find a suitable voice
file on the SD card in the transmitter. If this should
happen, check the contents of the “VoiceFile” folder
by inserting the SD card in a PC or laptop.
FIRMWARE UPDATE / Changing the screen lan-
guage
Important note:
It is essential to check the state of charge of your
transmitter battery before you carry out any update.
For safety’s sake recharge it and back up all occu-
pied model memories, so that you can restore them
if anything goes wrong.
VERSTECKTER MODUS
KNÜPPEL KALIBRIER.
FIRMWARE UPDATE
ANSAGEN
It is possible to update and / or replace the transmitter’s
firmware, and with it the screen language, using this
menu point; the procedure is similar to that described in
the section entitled “VOICE”. When this manual went to
press, the following languages were present on the SD
card supplied as standard in the set:
German•
English•
French•
Italian•
Spanish•
Corresponding updates and further information can be
found at www.graupner.de on the mx-16 HoTT pro-
duct page under Download.
DATEILISTE
MX-12_1V234_FRANCE.B
MX-12_1V234_GERMAN.B
MX-12_1V234_ENGLISH.
MX-12_1V234_ITALIANO
MX-12_1V234_SPAIN.BI
Use the arrow buttons  of the left or right-hand
touch-key to select the firmware version you wish to use,
for example:
DATEILISTE
MX-12_1V234_FRANCE.B
MX-12_1V234_GERMAN.B
MX-12_1V234_ENGLISH.
MX-12_1V234_ITALIANO
MX-12_1V234_SPAIN.BI
Confirm your choice by briefly pressing the central SET
button of the right-hand touch-key once more. The se-
lected firmware now starts to load into the transmitter’s
memory, and after two brief screen displays (which only
concern the start of the firmware update) you will see …
Firmware Download
Prozess Start
Please Wait....
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info