Manual Graupner MC18 (page 40 of 56) (English)

30121

Zoom out

Zoom in

1/56

Code 41 Code 42 Code 49

Aileron Rudder Aileron Flap Flap Aileron

Mixer Aileron Rudder Mixer Aileron Flap (for model type 7) Mixer Flap Aileron

Using code 41 the rudder can be affected, by an

adjustable amount, by the ailerons (particularly in

conjunction with aileron differential) to counteract the

negative yawing moment to achieve smooth circling

flight. The rudder remains fully controllable by the

rudder stick. The mixer can be switched on and off by

an external switch allocated via code 23. For speed

flight (code 52) the mixer is, in principle, automatically

turned off.

After calling code 41, the mix quota can be adjusted

using the INC and DEC keys (in 1% steps) and the

6 or 8 key (in 10% steps), and set to 0 by pressing

the CLEAR key, with direction of the mix being

changed by pressing the TURN key.

An adjustable amount of aileron control can be mixed

into the flap channel, via code 42, so the flaps will be

deflected in the manner of the ailerons on operation

of the ailerons, though normally with lesser deflection.

The advantage of this arrangement is increased rate

of roll and reduced drag at the same rate of roll, as a

result of the reduced aileron deflection required and a

more uniform lift distribution along the span of the

wing. The mixer can be switched on and off by an

external switch set with code 23.

After calling code 42, the mix quota can be adjusted

using the INC and DEC keys (in 1% steps) and the

6 or 8 key (in 10% steps), and set to 0 by pressing

the CLEAR key, with direction of the mix being

changed by pressing the TURN key.

The trim mixer can be switched on and off by

pressing the 5 key.

An adjustable amount of flap control can be mixed

into the aileron channel, via code 49, so the ailerons

will be deflected in the manner of the flaps on

operation of the flaps, though normally with reduced

deflection. The advantage of this arrangement is

reduced drag and a more uniform lift distribution

along the span of the wing.

After calling code 49, the offset adjustments may be

performed first, that is the mixer has to been informed

which position to the operating element for the flaps

(normally a slider-type potentiometer in channel 6) will

occupy in normal flight (with the flaps in the neutral

position). To this end the operating element is set

accordingly and then the STORE key is pressed.

The offset from the neutral position is shown on the

lower line of the display).

The mix quota can be adjusted using the INC and

DEC keys (in 1% steps) and the 6 or 8 key (in

10% steps), and set to 0 by pressing the CLEAR

key, with direction of the mix being changed by

pressing the TURN key.

Code 49 permits adjusting unequal mix quota and

directions. In the course of programming the

operating element for the flaps has to be set to the

end required to be adjusted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC18 in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC18

Graupner MC18 User Manual - German - 188 pages

Graupner MC18 User Manual - French - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner MC18 Manual

Product: