30121
38
Zoom out
Zoom in
Previous page
1/56
Next page
Code 23
Switch Function
Allocation of External Switch in F3B Models
38
External switches installed and connected to the plug
connections 1…8 are allocated to specific functions
by code 23. Some of these functions can be activated
and de-activated. The allocation can be performed to
suit the mechanical mode of operation of the switch
(open = ON, closed = OFF) or by reversing (open =
OFF, closed = ON).
In addition to physically existing switches a logical
“phantom switch” is also available, designated switch
number 9. By allocating this switch to a function, it
can be permanently switched on or off.
As any number of functions may be allocated to any
of the switches, linkages can be achieved for which,
otherwise, mixers would have to be used, which in
this way remain available for other purposes.
Allocation and Pole Reversal of External Switches
After calling code 23, the functions available for the
active model will appear on the upper line of the
display, with the allocated switches appearing on the
line below. Numerals indicate the switches wired to
the corresponding plug stations.
N means that the function in question is de-activated.
Flashing numerals indicate that the switch concerned
has been allocated with reverse polarity. The small
arrow (upper line) indicates the function to which the
switch can be allocated at the present time. It can be
moved to the right or left by pressing the INC and
DEC key, respectively.
As not all of the available functions can be shown at
the same time on the display, the latter can be moved
window style over the two lines, showing the
allocations. When the arrow points to the outermost
right function, the next function will appear in the
display when the INC key is pressed. They can be
scrolled left by pressing the DEC key. In this
manner any of the functions can be displayed.
To allocate the selected functions press the CLEAR
key. As a result a question mark symbol will appear
on the lower line. To switch be may allocated by
pressing keys 1 9 . If the switch is to be reversed,
the DEC key has to pressed first.
If a de-activatable, currently active function is
selected, pressing the CLEAR key will first de-
activate the function, pressing the CLEAR key a
second time will display the question mark symbol.
The type and number of functions, to which switches
can be allocated via code 23, depends on the
activated model type (code 58).
Available functions for model types 6 and 7
CLK Stopwatch in standard mode, runs as long as
switch is closed.
DI1 Differentiation switch 1 (see code 22)
DI2 Differentiation switch 2 (see code 22)
2 4 Mixer Ailerons Rudder
3 6 Mixer Elevator Flaps
2 7 Mixer Ailerons Flaps
STA Pre-set for Start
SPD Pre-set for Speed task
STR Pre-set for Distance task
Selection of individual functions:
C
L
K
D
I
1
D
I
2
2
4
N
9
9
9
4 x INC 4 x DEC
3
6
2
7
S
T
A
S
P
D
9
9
9
9
4 x INC 4 x DEC
S
T
R
9
Using code 73 the switch position, number and
direction of operation of the desired switch can be
found quickly and reliably.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC18 in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC18

Graupner MC18 User Manual - German - 188 pages

Graupner MC18 User Manual - French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info