Manual Graupner MC18 (page 26 of 56) (English)

30121

Zoom out

Zoom in

1/56

Code 94

Copying

Model Copying Functions

Code 94 permits copying model data form one model

to another one, and also via an external interface of a

transmitter to another mc-18 transmitter.

With the aid of a separately available PC adapter,

order N° 8181, it is also possible to transfer either

individual model adjustments data or the complete

contents of the memory of the transmitter (all models)

into a personal computer compatible with industrial

standards via the serial interface of the latter, saving it

there on a disk for possible re-transfer to the

transmitter (or some other transmitter).

A special cable, order N° 4180, will be required for

the transfer to another mc-18 transmitter, which has

to be plugged into the connection socket for the

PROFITRIM module of both transmitters.

After activation of code 94, the transmitter expects the

input of the model memory of which a copy is to be

produced. This is achieved either by input of the

model number or by skimming through the list of

models using the INC and DEC keys. The selection

is then made by pressing the ENTER key. Then the

model memory, into which the copy is to be produced,

is selected in the same manner. The copying process

is triggered by pressing the ENTER key, with all

previously stored data being transferred to the model

memory, into which the data is copied. If the name of

the model the data of which is being copied has been

entered, this name will also be transferred to the

copy, but with a + symbol added to the last letter of

the name to distinguish it from the original.

For safety’s sake, model memories that are active at

the moment must not be copied!

When copying from one transmitter to another, or to a

personal computer, selection is performed by keys

INC and DEC , with “external interface” for source

at the receiving transmitter, and as target for the

sending transmitter. In addition, the “all-models

memory” option is available, which permits

transferring all model memories simultaneously. In

that case, the options of both units have to be set

accordingly. The transfer process should be initiated

by the receiving unit via the ENTER key, followed by

the sending one.

Copying between two mc-18 transmitters

Using the programming interface mc-18/mc-18 (order

N° 4180) single model and all models memories can

be copied between two mc-18 transmitters. For

example, please refer to pages 54/55.

In the case of transmitters with the extended memory

(for 30 models), on deletion (code 56) and when

copying (code 94) a back-up copy of that memory will

be made onto which the copy is transferred or which

is being deleted. This permits reversing accidental

deletion or overwriting of model adjustments, this

back-up copy being copied onto a normal memory

station. Just call code 94 as usual and input “from

model” memory station 31. For copying examples

between two mc-18 transmitters refer to pages 54/55.

Data Exchange to and from Personal Computers

Precise instructions are given in the disk included in

the programming interface mc-18/PC (order N° 4181).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC18 in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC18

Graupner MC18 User Manual - German - 188 pages

Graupner MC18 User Manual - French - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner MC18 Manual

Product: