30121
23
Zoom out
Zoom in
Previous page
1/56
Next page
Code 79 Code 16 Code 31
Servo Slow Down Signal Generator Setting Channel 1 Centre
Slowing-Down Transit Time Changing Control Travel Throttle/Spoiler Actuating Curve
23
S
L
O
W
D
O
W
N
O
F
F
E
N
T
E
R
C
H
T
O
A
C
T
.
In some special cases, such as retracts, the normally
fast transit time of a servo does not look right.
With code 79, the transit time of a servo connected to
any of the channels may be slowed-down from 0.5s to
30s when moving from one end point to the opposite
end point.
After activation of code 79, the desired channel has to
be selected using keys 1 9 .
Transit time is slowed down by the INC key, with
steps being very small for short transit times and
larger with longer ones. Below 1.5s the steps are so
small that the display only changes after several
steps. In all some 50 intermediate values are
provided. Pressing the DEC key reduces the transit
time and the CLEAR key cancels the deceleration
completely.
This function is not compatible with retract servos
such as G503 (order 3977) and C2003
(order 3890).
T
R
A
C
E
R
A
T
E
p
u
s
h
c
h
k
e
y
6
-
8
Control travel resulting from actuating an operating
element on function inputs 6 8 is adjusted by code
16.
The range of adjustments amounts to 0 150% of the
normal range. Unlike code 12 (servo travel adjust),
these adjustments refer to the operating element
(slider, rotary control or switch) independent of the
latter acting directly on a single servo or via a
complex mixing and coupling function on several
servos.
After calling code 16 and input of the function
concerned via keys 6 8 , the adjusted control
range will be indicated with a prefix + or indicating
the side. For adjustment and display the operating
element concerned has to be moved to the end point
in question. The control range is then adjusted using
the INC and DEC keys, or set to the normal (100%)
via the CLEAR key.
T
H
R
/
B
R
K
M
I
D
P
N
T
+
1
6
%
Code 31 permits changing the characteristics of the
servo connected to channel 1 (throttle/spoiler) at
neutral position of the stick without affecting the end
position.
This setting can be used to compensate for non-linear
throttle response, or to intentionally obtain a non-
linear function of the spoilers, for example.
After calling code 31 adjustment of servo travel is
performed using the INC and DEC keys, while
directional changes can be made via the TURN key.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC18 in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC18

Graupner MC18 User Manual - German - 188 pages

Graupner MC18 User Manual - French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info