30121
17
Zoom out
Zoom in
Previous page
1/56
Next page
Programming Code List (Types 1…5)
17
The codes for the various options were chosen
as a result of in-house deliberations. The
following programming instructions, are arranged
in the sequential order of the individual
programming steps. These are arranged to suit
practical requirements, the code numbers are
not arranged in numerical order.
When a new model is being programmed, be
sure to follow the sequences detailed in the
following pages. If you don’t follow it, you may
forget something or unintentionally change other,
earlier made adjustments.
In subsequent descriptions functionally related
options have been grouped together, so they will
be comparatively easy to fund.
No. Display Meaning Page
Transmitter Basic Adjustments
56 MODEL SELECT Select Model 18
95 MODULATION PPM/PCM Select 18
57 MODE SELECT Stick Mode Selection 18
58 MODEL TYPE Model Type Selection 19
32 MODEL NAME Input Model Name 19
18 IDLE R. TRIM Idle Trim Adjustment 19
23 SWITCH FUNCT. External Switch Allocation 20
37 INP-PORT ASS Allocation of External Controls 21
Model Basic Adjustments
43 V-TAIL SW V-Tail Mixer 21
11 REVERSE SW Direction of Rotation of Servos 21
15 SUB TRIM Servo Neutral Point Adjust 22
12 THROW ADJUST Servo Throw Adjustments 22
19 THROW LIMIT Servo Throw Reduction 22
79 SERVO SLOW-D Servo Slow Set-up 23
Further Adjustments
16 TRACE RATE Adjust Effect of Operating Stick 23
31 THR/BRK MIDP Set Channel 1 Mid-Point 23
34 SWITCH DR/EXP Dual Rate/Exponential Switch Set-up 24
13 DUAL RATE Switchable Servo Throw Reduction 24
14 EXPONENTIAL Exponential Servo Movement 24
35 RED. TRIM Allows Reduction of Trim Range 25
Special Functions
59 TRIM OFFSET Storage of Trim Offset Values 25
94 COPY MODEL Model Copy Facility 26
22 DIFF. RATE Aileron Differential 27
17 RED. THROTTLE Switchable Throttle Reduction 28
66 PROGRAM-AUTOM Automatic Manoeuvre Set-up 28
63 CH1-SWITCH Channel 1 Dependant Auto Switch 29
Freely Programmable Mixers
51 MIXx CHANNEL Channel Allocation for Mixers 30
33 SWITCH MIX Allocation of Mix Switches 31
61 MIXx COM GAIN Mixer No x Common Gain Adjust 31
71 MIXx SEP GAIN Mixer No x Separate Gain Adjust 31
72 MIX ONLY CH Allows Isolation of Control from O/P 32
No. Display Meaning Page
Clocks:
97 ALARM TIMER Stop Watch Timer 32
98 INTEG. TIME TX operating Timer 33
Safety Devices
77 FAIL SAFE MEM Set-up of Failsafe Mode 33
78 FAIL SAFE BAT Failsafe on Low RX Battery 34
88 KEYBOARD LOCK Lock the Keyboard 34
99 ALL CLOSE Lock the Transmitter 34
Test Functions
76 SERVO TEST Allows Testing of Servos 35
74 SERVO POSIT. Display of a Servo Position 35
73 SWITCH POSIT. Display of Switch Positions 36
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC18 in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC18

Graupner MC18 User Manual - German - 188 pages

Graupner MC18 User Manual - French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info