30117
82
Zoom out
Zoom in
Previous page
1/104
Next page
Stopwatch and Countdown Clock
(access via Set-Up Menu)
82 Helicopter
STOPWATCH and
ALARM TIMER
In normal operating mode the display can be set to
timer display with the CH SEL button. The default,
without having called code “TMR”, is a stopwatch
(0...999s). The Start/Stop is using either INC or
DEC and reset to “000” is by using CLEAR . If the
transmitter is switched off & back on, the display last
selected appears, i.e. either model name or "000".
The code “TMR” allows the application possibilities
to be extended:
1. Countdown Clock (Alarm Timer), which has an
audible warning tone. The start time is set by the
user and ranges from 10s to 900s. 20s before the
end of the time, an internal buzzer sounds every
2s, below 10s every second to 0s. The clock then
continues to run counting up to 999s. This
additional time is shown by a "+" displayed in the
lower line before the battery voltage. Start/Stop of
timing is controlled by the INC / DEC buttons.
2. Throttle Stopwatch, as normal except the
start/stop is controlled by the throttle stick. The
switching point set independently to the position
of the control lever centre. Additionally it can be
determined whether the timer start is by pushing
or pulling the throttle stick. With this option the
true engine run time can be measured.
3. Alarm Timer, a countdown timer as 1 above, but
controlled by the throttle stick as in option 2.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC16 in the language / languages: English as an attachment in your email.

The manual is 16,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC16

Graupner MC16 User Manual - German - 68 pages

Graupner MC16 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info