467111
316
Zoom out
Zoom in
Previous page
1/345
Next page
316 Programming examples - Using ight phases
»Copy / Erase« (page 74)
… and switch to the "Copy flight phase" line:
Copy flight phase
Erase model
Copy model –> model
Export to SD
Import from SD =>
All eight possible flight phases are listed in "Copy
from phase":
Select the flight phase to be copied, e. g. "1 Normal".
7
Copy from phase:
3
5=>
=>
2
4
6
1
8
Normal Thermal
Speed
With a brief tap on the centre SET key of the right
touch pad, switch the window to entry of the target
memory "Copy to phase".
Select phase "2 Thermal" as the target:
7
Copy to phase:
3
5=>
=>
4
6
1
8
Normal
Speed
Thermal
2
Confirm the selection with a brief tap on the centre
SET key of the right touch pad.
A security query follows, who should be confirmed
with "Yes":
Phase to:
to be copied?
NO
1 Normal 2 Thermal
YES
Then repeat the process with flight phase "3 Speed".
Now we will program the required settings in the
ight phase "Thermal" as an example.
In order to vary camber flap positions in the «Ther-
mal» phase, it is merely necessary to switch over to
the menu …
»Control adjust« (page 118)
… then change Input 6 as described beginning on
page 118 from "GL(obal)" to "PH(ase)" and finally
assign it to an operating element.
To do this, first use the selection keys to switch into
the "Typ" column for "I6" and change this setting from
"GL" to "PH".
0% +100%I5
I6
I7
I8
Ty p
+100%
0.0 0.0
– travel + –time+
0% +100%
+100%
0.0 0.0
0% +100%
+100%
0.0 0.0
0% +100%
+100%
0.0 0.0
GL
GL
fr
Cn1
fr
---
---
---
offset
GL fr
Thermal
PH
---
SEL
Thereafter change one column to the right into the
column above SEL
0% +100%I5
I6
I7
I8
Ty p
+100%
0.0 0.0
– travel + –time+
0% +100%
+100%
0.0 0.0
0% +100%
+100%
0.0 0.0
0% +100%
+100%
0.0 0.0
GL
GL
fr
Cn1
fr
---
---
---
offset
GL fr
PH
---
SEL
Thermik
… and now assign this input, as described in the
section "Assigning transmitter controls, switches and
control switches" on page 60, the left proportional
slider in the middle console to, for example:
0% +100%I5
I6
I7
I8
Ty p
+100%
0.0 0.0
– travel + –time+
0% +100%
+100%
0.0 0.0
0% +100%
+100%
0.0 0.0
0% +100%
+100%
0.0 0.0
GL
GL Cn1
fr
---
---
---
offset
GL fr
PH
---
SEL
Sl1
Thermal
This control will allow the ailerons (2 + 5) and camber
flaps (6 + 7) to be continuously adjusted (as camber
flaps) with a mixer ratio yet to be set via the »Wing
mixers« menu.
If you assign the still free second three-stage switch
to Input 6 instead, you can call three different FL posi-
tions of the ailerons (AIL) and camber changing flaps
(FL) as well as three elevator positions (Elev) in the
"Thermal" flight phase, see the following page. (These
three switch positions correspond to the centre posi-
tion and the two limit positions of the previously men-
tioned proportional rotary control.)
Note:
The FL and AIL ap positions in the two limit
switch positions or in the switch centre
depend on the value set in the column "-
316


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info