Manual Graupner MC 32 HOTT (page 12 of 345) (English)

467111

Zoom out

Zoom in

1/345

12 Remote control set description

mc-16 and mc-20

The Newest Generation of Remote Control Technology

The technical advances across the entire spectrum of

model building is an ever-present challenge to design

engineers. This is why the introduction of new trans-

mission technology in the 2.4 GHz band represents a

new milestone.

The HoTT-System (Hopping Telemetry Transmission)

developed by Graupner is a synthesis of know-how,

engineering and testing done around the world by

professional pilots.

Established Graupner HoTT techniques theoreti-

cally permit over 200 models to be operated at the

same time. However, because of the interspersed

radio-frequency utilization permitted by certiﬁ cation

for the 2.4 GHz ISM band, this number is signiﬁ cantly

lower in practical application. Nevertheless, in general

more models can be operated simultaneously in the

2.4 GHz band than would be the case in conventional

35 or 40 MHz frequency bands. The real limiting fac-

tor is – as often before – is still likely to be the size of

available operating space (i. e. airspace for aircraft).

Alone the fact that it is no longer necessary to coor-

dinate transmitting frequencies with other pilots in the

vicinity (which is sometimes quite difﬁ cult in broken

landscapes, such as on hillside slopes) represents an

enormous boost for remote control operating security.

Bidirectional communication between transmitter

and receiver, by way of a return channel built into

the receiver, permits convenient access to data and

programming in the HoTT receiver. For example, this

makes it possible to swap receiver outputs or to divide

up control functions among multiple servos (channel

mapping). Servo travel and servo rotation directions

in the receiver can also be matched to one another

with these facilities. Telemetry data, like VARIO and

GPS data, can be called up from optionally available

modules.

Based on the mc-24 Graupner/JR computerized

remote control system, the mc-32 HoTT remote

control system has been especially developed for ex-

perienced RC pilots All conventional model types can

be readily operated with the mc-32 HoTT system,

regardless of whether the model is a winged aircraft,

helicopter, ship or land vehicle.

Complex mixed-control functions of guiding surfaces

are often necessary for winged aircraft (rudder, eleva-

tors) and helicopter models (swashplate). Thanks to

modern computer technology, very diverse model

requirements can be programmed in the simplest

conceivable manner with touch-sensitive keys (CAP

Touch). Simply select the given model type from the

mc-32 HoTT program and its software will assem-

ble all signiﬁ cant mixer functions and coupling func-

tions automatically. This eliminates the need for sepa-

rate modules in the transmitter to implement complex

coupled functions and also makes sophisticated

mechanical mixer mechanisms in the model unnec-

essary. For example, this makes the mc-32 HoTT

transmitter fully equipped with both software and

hardware to operate the well-known NAUTIC modules

on the receiver side. The “channel sequencer” is new.

It permits the operation of up to three servos to be

automated.

The mc-32 HoTT system offers optimal security

and reliability without having to forgo great operating

convenience. The mc-32 HoTT remote control sys-

tem has 80 model memory locations. Additional ﬂ ight-

phase-speciﬁ c settings can be stored in every model

memory location. For example, such settings can be

made for various parameters that can be called up to

implement particular ﬂ ight maneuvers at the “press of

a button”. Additional model memories can be stored

on the SD card, which is included standard with the

set. Even telemetry data can be recorded for subse-

quent evaluation on a PC.

Since the mc-32 HoTT is equipped with two dis-

plays, the lower display has been optimized for com-

prehensible, simple operation of the software. The

graphic representation of mixer functions is particu-

larly helpful. The upper display allows telemetry data

to be called up from the receiver.

Functionally-related options are clearly arranged by

content in a simple organization. The clear, compre-

hensible program structure permits a beginner to

quickly become familiar with the various functions and

able to use all options pertinent to his level of exper-

tise with remote control models.

This handbook describes every menu in detail. There

are tips, many notices and programming examples to

supplement the descriptions and also explanations for

model speciﬁ c technical terms, like transmitter con-

trol, dual rate, butterﬂ y, and so on.

Please observe the safety notices and technical

notices. Read through the instructions attentively.

Before usage, test all functions by simply attaching

servos to the receiver included in the set. While doing

this, observe respective notes on page 68. This will

help you learn the essential operating techniques and

functions of the mc-32 HoTT.

Always handle your remote controlled model with a

sense of responsibility so that you do not endanger

yourself or others.

The Graupner team wishes you much pleasure and

success with your mc-32 HoTT, the newest gen-

eration of remote control systems.

Kirchheim-Teck, july 2015

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner MC 32 HOTT Manual

Product: