747991

Graupner MC-28 Manual

24
Zoom out
Zoom in
Previous page
1/40
Next page
24 / 40 33028_mc28_T1V3_sh_en
Binding a receiver
Supress menus
Model select
Base setup model
Supress models
Model type
Copy / Erase In order to be able to establish a connection to the transmitter,
Graupner-HoTT receivers must be connected to at least one model
memory of “their” Graupner-HoTT transmitter. This process is com-
monly referred to as “binding” and can be repeated at any time.
By default, this “binding” of a recipient is always model-memo-
ry-specific, but it can be changed to transmitter-specific, and vice
versa, at any time and for any non-bound model memory of a trans-
mitter in the “Binding Type” menu line.
The exact sequence of the binding process results from the combi-
nation of the description of the transmitter-side part of the binding
process in Part 2 of the transmitter instructions and from the descrip-
tion of the receiver-specific procedure to be found in the respective
receiver instructions.
Principal procedure step-by-step
1. Bring transmitter and receiver at a moderate distance from each
other.
2. If necessary, switch on the mc-28 HoTT transmitter without RF or
set the RF module in the “RF module” line of the “Basic setup
model” menu to “OFF”.
3. If necessary select the »Basic setup model« menu in the transmit-
ter.
4. Touch the ENT key.
5. Change to the “Module” line with the selection buttons.
6. Switch on the power supply of the receiving system.
7. …
… receiver with SET button
Press the SET button on the receiver for approx. 3 seconds.
… receiver without SET button
The receiver automatically switches to binding mode after switch-
ing on. Details can be found in the corresponding description.
8. Touch the ENT button on the transmitter to initiate the transmit-
ter-side binding process.
If the LED of the receiver indicates, according to its description, cor-
rect connection and in the value field of the line “module” the
receiver abbreviation appears, the binding process was completed
successfully. Otherwise, the positions of the devices may have to be
changed and the entire procedure must be repeated.
Modul HoTT bind
BASIC SETTINGS, MODEL
bind
SEL
Rcv Ch Map R12 R08
RF transmit
Stick mode 1
OFF
1
n/a
n/a
BD1 BD2
HoTT
Mod.name
Stick mode
module
BASIC SETTINGS, MODEL
Binding type model
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC-28

Graupner MC-28 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info