747991
23
Zoom out
Zoom in
Previous page
1/40
Next page
23 / 40
33028_mc28_T1V3_sh_en
General commissioning
Note
As soon as the transmitter is switched on then the throttle position
is checked. If the throttle position is not in the motor-off area, then
the drive motor may start in an uncontrolled manner. This check is
performed by all the models with the setting "Motor at CH1 front/
back". The warning alarm "Throttle too high" appears. For this rea-
son in this case the RF module will not be switched on. This check
is performed for every model types. With helicopter models the
warning works only if you use a Motor-off programming or if a throt-
tle limiter is set.
!
WARNING
If you do not follow the afore mentioned instructions, the con-
nected drive motor can run accidentally when the transmitter is
switched on. Risk of injury! Always program a switch for motor
stop!
If the previously mentioned checks are passed, the RF module will
be activated when the transmitter is switched on and in the display
appears a selection indicator.
Select with the selection buttons of the right four way keys RF ON/
OFF. By tipping the SET button on "OFF" the RF module is switched
off.
The color of the lighting central LED changes to red and you are now
in the transmitter main menu display.
#01
0:33h
S
L0:00.0
0:00.0
0.0V
3.8V MHoTT
The symbol mean that the currently active model memory has
once been linked to a receiver but is presently not linked. (We have
turned the RF module off for example reasons.) If instead the trans-
mitter was switched on without turning off the RF module, the cen-
tral LED would light blue and the symbol would blink. Contempo-
raneously a warning acoustic signal is emitted until a connection is
established with the respective receiver. As soon as this connection
is established appears a a field strength indicator and the warn-
ing signal stops.
If the telemetry connection is established the respective indication
of the receiver signals strength
M
so as the actual receiver
power supply voltage.
On the other hand, if the screen displays the symbol combination
and the center LED illuminates in red continuously then the cur-
rently active model memory is not "bound" to any receiver.
Throttle
too
high!
RF on/off?
OFF
ON
Please select
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC-28

Graupner MC-28 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info