747991
16
Zoom out
Zoom in
Previous page
1/40
Next page
16 / 40 33028_mc28_T1V3_sh_en
In the "Transmitter setting" submenu, you can set one of the follow-
ing modes in the "DSC output" line depending on the number of
functions to be transmitted: PPM10, PPM16, PPM18 and PPM24.
Default setting: PPM10.
Memory cards
Compatible memory cards
micro SD up to 2 GB
micro SDHC up to 32 GB
Our recommendation: For a normal use a memory card with a stor-
age capacity of up to 4 GB is sufficient.
Inserting and removing the memory card step by step
Switch off the transmitter.
The memory card slot is located in the left provided connections of
the transmitter.
To insert
Push the SD card as deep as you need to win the spring resistance of
the slot. (contacts upward)
To remove
Push the SD card slightly toward the card slot to unlock it and then
remove it.
#01
2:22h
S
L
0:00.0
0:00.0
5.5V
3.7V MHoTT
The included memory card is ready for use as soon as the transmit-
ter is switched on. In the display appears the symbol of a memory
card.
Otherwise, folders are created on the memory card ( represented in
the transmitter display by a permanent filling from left to right mem-
ory card). When the animation finishes, the inserted memory card is
ready for use.
You can connect the memory card to your PC by using a memory
card reader. Copy the data downloaded from the transmitter page
on the web site in the related folder of the memory card. Insert the
memory card in your transmitter.
Data recording/Data saving
The data recording in the SD card is linked to the log timer. If it is
started, the data recording starts as well and it stops when the log
timer is stopped.
The data writing on the memory card is remarked by the symbol of
the "filling" of the memory card with black from left to right.
After the installation of the memory card, there is a folder structure
in it. These folders are actually empty.
Finally, the log files are saved in subfolders called "Modelname"
named according to the structure 0001_year-month-day.bin. If a
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC-28

Graupner MC-28 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info