747991
15
Zoom out
Zoom in
Previous page
1/40
Next page
15 / 40
33028_mc28_T1V3_sh_en
Note
The HV-LiPo battery reaches its full capacity only when it is
externally charged at 4.35V. The internal charging voltage is lim-
ited to 4.2 V for compatibility reasons.
PC COM Port connection
Through this socket it is also possible to connect the transmitter
to a PC. The software that the computer needs as well as the
appropriate USB driver can be found on the download page on
www.graupner.de for the respective product.
Mass storage memory
If you select this option, then you can accede from your PC
directly to the SD card (if insert).
2. Data socket
The data socket is suitable for connection of an optional smart
box or an external optional Bluetooth module.
DSC socket
Connection socket for flight simulator or T/P systems
The standard two-pin DSC socket on the transmitter functions as a
TRAINER or PUPIL socket as well as an interface for flight simulators
or other external RF modules.
To ensure a correct DSC connection, observe the following:
Attention
When your transmitter is directly connected to a desktop computer
by a connecting cable (DSC cable) and/or a computer interface is
connected to your simulator, the transmitter may be destroyed
by electrostatic discharge. This type of connection should therefore
only be used if you protect yourself from electrostatic discharge
while operating the simulator by wearing a commercially available
grounding armband. Graupner therefore strongly recommends
only using wireless simulators.
Perform any necessary adaptations in the menu.
The status LED is constantly red and in the display will appear DSC.
In the upper display appears the transmitter logo.
The transmitter is now ready for use.
Connect the other end of the connecting cable to the device while
observing the relevant operating instructions.
Note
Make sure that all the plugs are securely inserted in the respective
sockets, and only use the provided plug-in connections with a 2-pin
jack plug on the DSC side.
PUPIL
#11
0:01h
S
L
DSC
0:00.0
0:00.0
4.1V HoTT
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC-28

Graupner MC-28 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info