747993
71
Zoom out
Zoom in
Previous page
1/80
Next page
71 / 80
33028_mc_28_Teil2_jh
Swashplate linearization:
For Flybarless systems, select "no" here. For paddle head sys-
tems, the setting "yes" can prevent unwanted side effects: a
pitch change when the roll function is activated or tensions
between the linkage of the swash plate servos.
Rotor direction:
Here set the direction of the rotor direction, seen from above the
helicopter (see figure). This information is required to ensure the
mixers can compensate for torque and power.
Pitch min.:
Pitch min. Rear = pitch minimum is at the rear of the stick
Pitch min. Front = pitch minimum is at the front of the stick
All other options of the helicopter program which involve the gas
and pitch function are dependent on this function. For example,
the throttle curve, idle trim, tail rotor, etc.
Expo throttle limit:
An exponential curve characteristic can be attributed to the func-
tion "Throttle limit". Described in the "Control settings" menu.
(see figure)
Throttle limit warning:
The function "Throttle limit warning" sets the critical position of
the throttle servo variable (between 0 % and -100 %) above which
this warning should be emitted. The pitch minimum position of
the stick is the reference point of -70% (specified in this menu).
3. Setting up a flybarless system:
If you are using a Flybarless system, set it up now. Please refer to
the instructions for the Flybarless system.
4. Phase setting menu (Phase setting):
Phase 1 - Normal
Phase 2 - Acro 3D
(Please also refer to the previous descriptions of the "Phase setting"
menu)
Linear. swashpl.
Swashplate
no
3Sv(2rol)
Rotor direct right
Helicopter type
Pitch min. back
SEL
rechts-
drehend
links-
drehend
Pitch
Thr
too
high!
Rotor direct. right
Helicopter type
Pitch min. back
Expo thro lim. 0%
SEL
Thr.lim warning –70%
Phase settings
Phase assignment
Non-delayed chan
Announce
Timers (general)
Phase timers
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info