747993
48
Zoom out
Zoom in
Previous page
1/80
Next page
48 / 80 33028_mc_28_Teil2_jh
Multiflaps menu
This menu is only displayed if at least two ailerons and one flap or
more are selected in the "Model type" menu. The "AILE2" column
and the "FLAP" and "FLAP2" columns are available in this menu to
the right of the "AILE" column. The columns are dependent on the
number of pairs of control surface specified in the »Model type«
menu.
AILE (Aileron -> Flap)
In this line, determine the phase-dependent control percentage of
actuation of "AILE", "AILE2", "FLAP" and "FLAP2". The setting range
of ±150 % enables you to adapt to the deflection completely inde-
pendently from the direction of the servos.
AILE Tr. (Aileron trim)
This line is dimmed when "2AILE 1FLAP" is selected in the "Model
Type" menu. In this line, determine the phase-dependent trim per-
centage of "AILE", "AILE2", "FLAP" and "FLAP2". The adjustment
range is ±150%, similar to the adjustment range of the trim controls.
Diff. (Differentiation of the aileron function)
Select "2AILE 1FLAP" in the "Model Type" menu, one level higher in
the "Wing Mix" menu. In this line, set the aileron differentiation and
the differentiation of the FLAP and FLAP2, if the flaps are operated
as ailerons. The adjustment range of ± 100% enables you to set the
correct differentiation direction completely independent of the rota-
tional directions of the ailerons and flaps servos.
FLAP Pos. (FLAP position)
Here, set the phase-specific flap positions for all the flaps on the
respective model. The adjustment range of ± 100% enables you to
move the flaps to the desired position, regardless of the direction of
rotation of the ailerons and flaps servos.
Changes in the menu "Phase trim" and changes in the line "FLAP
Pos" therefore always have a direct effect on each other.
FLAP (Effect of the Flap control)
In this line, specify the percentage of the input 6 settings in the "Con-
trol settings" menu. This line’s inputs are dependent on the phase.
This line acts to the control surfaces positions of the ailerons and
flaps. A symmetrical or an asymmetrical effect can be defined for
each flap. Set the related control in the middle or the related side.
Aile diff.
Brake settings
0%
AI 0%
Wing mixers
FL EL 0%0%
–––
–––
RU
Multi-flap menu
Normal
0%
FL pos.
AI
Normal
Diff. 0%
AI Tr.
AI +100%
+100%
0%
FL pos.
AI
Normal
Diff. 0%
AI Tr.
AI +100%
+100%
0% (normal)
50% (differential)
100% (Split)
0%
FL pos.
AI
Normal
Diff. 0%
AI Tr.
AI +100%
+100%
FL
0%
0%
FL pos.
0%
AI
Normal
Diff. 0%
AI Tr. +100%
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info