747993
44
Zoom out
Zoom in
Previous page
1/80
Next page
44 / 80 33028_mc_28_Teil2_jh
adjustment when extending the flaps and/or the speed-brakes.
Aile -> Dir
The aileron is associated with the rudder. In conjunction with the dif-
ferentiation of the ailerons, the negative torque is compensated.
This allows a "clean" curve flight. The rudder remains separately con-
trollable. The deflection direction can be adjusted in the range of
±150%. If you want to control the aileron or the rudder without the
mixer, a switch must be programmed. This switch allows you to turn
the mixer on and off. The setting is symmetrical.
Model type: "2AIL"
The “Mixer menu” of the transmitter corresponds to the figure on
the left if you have entered "2AIL" in the "Aile/Flap" line of the
"Model type" menu. All available parameters can be changed
depending on the phase, regardless of the selected combination of
ailerons and flaps.
Brake setting
The "Brake settings" menu is not shown if “yes” has been entered in
the "Model type" menu "Motor on CH1 front / rear" and in the col-
umn "Motor" of the "Phase setting" menu for the currently active
phase.
The "Butterfly" and "Diff.red." functions are available in the "Brake
adjustment" menu.
Butt.
Move the "brake" control (Throttle control stick) into the brake posi-
tion as far as it will go. Then, change to the "Butt." (Butterfly) line and
tap the SET button. If you want to decelerate the model, set a value
which will raise the aileron completely. Use the speed-brakes as the
main brake. The ailerons should raise lightly.
D.red.
With the "D.red" function (differentiation reduction), you can switch
off the set aileron differentiation during braking. There will be a suf-
ficient aileron effect, even when the ailerons are raised.
Aile.diff. / AILE -> DIR / ELE -> AILE
The menus are explained in the previous sections.
Brake settings
AI 0%
Wing mixers
EL FL 0%
0%
–––
–––
RU
Normal
FL EL 0%
0% –––
Aile diff.
Brake settings
0%
AI 0%
Wing mixers
EL AI 0%0%
–––
–––
RU
Normal
EL curve
Brake settings
AI
Butt.
D.red
0%
0%
0%
0%
0%
0%
WK WK2
Normal
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info