747993
24
Zoom out
Zoom in
Previous page
1/80
Next page
24 / 80 33028_mc_28_Teil2_jh
Switch-on warning
This option allows you to program a question message the postion
of a switch or control so when the transmiter is switched on a warn-
ing willappear on the base display.
In this line assign a switch, a control switch or a logical switch.
Activate a warning:
Tap on the SET button in the "Switch-on warning" line.
Move the desired switch to the position that has to be verified.
Combinations with logical switches are also possible.
The blinking blue LED WARNING in the transmitter is activated
when the transmitter is switched on and the RF module remains
switched off. To deactivate the warning, move the programmed
switch in another position.
Deactivate the warning:
Tap on the SET button in the "Switch-on warning" line.
Tap on the Up and Down buttons of the right selection field.
No switch is assigned in the selection field (three lines will dis-
played).
Auto trim
With this function you can save the control position of a model in the
trim memory. The function only acts on channel 2, 3 and 4. This func-
tion is activated through a switch. Select the line "Auto trim" and tap
on the SET button. Move a switch in the desired position. We recom-
mend you select a momentary switch.
Save the position in the trim memory step-by-step:
3. Move the model to the desired altitude through the control
sticks.
4. Actuate the assigned switch and move the control sticks back
to the neutral position.
5. After 1 sec. the position will be saved in the trim ( ± 30%).
Note
If the auto trim function is not required any more, then we suggest
you deactivate the switch assigned to the "Auto trim function".
Deactivating the switch could avoid an accidental error.
Timer auto reset
In this line you can select:
"Yes" - all timers will be set back to zero when you switch the trans-
mitter on (excludes the model timer and the transmitter operating
timer).
"No" - all timers hold the stand from the last use of the transmitter.
The timer will be reset when the transmitter is switched on.
Base setup model
RF transmit ON
RF Range Test 99sec
DSC Output PPM10
Power on warning –––
Move desired switch
to ON position
(ext. switch: SET)
GRAUBELE
01
0:01h
S
L
«normal »
K78
0:00.0
0:00.0
4.8V
4.1V
M
HoTT
! Warning !
Base setup model
RF Range Test 99sec
DSC Output PPM10
Power on warning –––
Auto Trim 8
Base setup model
RF Range Test 99sec
DSC Output PPM10
Power on warning –––
Auto timer reset yes
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info