467112
164
Zoom out
Zoom in
Previous page
1/180
Next page
164
Appendix
Accessories
Copy lead:
mc-22(s) / mc-22(s), mc-22(s) / mx-22
Order No. 4179.2
For copying data between two mc-22s transmit-
ters, or between mc-22(s) and mx-22 transmitters.
An interface distributor (Order No. 4182.3) must
be fi tted to each transmitter. For connection to an
mx-22 transmitter the Trainer / PC module, Order
No. 3290.22 is required.
Note:
The model memory formats of the mc-22, mc-22s
and mx-22 are compatible, i.e. a model program-
med in the mc-22s can be copied into an mc-22 or
mx22, and vice versa. Generally the assignment
of the switches and transmitter controls will need
to be checked and adjusted, as it is highly unlike-
ly that the whole transmitter confi guration will be
identical.
DSC* module for mc-19, mc-22(s) and mc-24
transmitters
Order No. 3290.24
An optional module for connecting the transmitter
to a fl ight simulator or to the DSC lead, Order No.
4178.1. If the transmitter is switched off when the
3.5 mm mono barrel plug is connected to the mo-
dule, the transmitter is activated without the RF
section. This enables you to connect it to a fl ight
simulator or a DSC* lead very simply, and operate
the transmitter without broadcasting an RF signal.
* DSC = Direct Servo Control
4160.11
4160.44
4160
4160.1
4147.1
The latching On / Off switch has a mechanical
lock which prevents the toggle being moved ac-
cidentally. The switch can only be operated by si-
multaneously lifting and tipping the toggle.
If you have assigned a switch to an important cou-
pling function, and operating the switch acciden-
tally would cause the model to crash, a latching
switch should always be used.
2-way momentary switch
Order No. 4160.44
Self-neutralising, for two momentary switched
functions controlled by a single switch.
Momentary switch
Order No. 4160.11
Self-neutralising, for momentary switched func-
tions. Required as start / stop switch for stopwatch
functions.
Differential (three-position) switch
Order No. 4160.22
Switches between two or three mixer functions,
ight phases, etc..
External switches
On / Off switches for operating auxiliary functions,
e.g. mixers.
Order No. 4160
for switching one function; long toggle.
Order No. 4160.1
for switching one function; short toggle.
Latching external switch
Order No. 4147.1
for switching one function.
4160.22
164


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 22S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 22S in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info