467112
162
Zoom out
Zoom in
Previous page
1/180
Next page
162
Opto-electronic Trainer system with light-pipe lead
Order No. 3289
This Trainer system enables you to transfer indi-
vidual functions, several functions or all the func-
tions to the Pupil transmitter. The set is designed
for expanding the mc-22s transmitter for use as a
Teacher transmitter.
Notes:
The Teacher transmitter must be fi tted either with
an adaptor, Order No. 4184.1, or the mc-22(s) in-
terface distributor, Order No. 4182.3, to allow the
Trainer module contained in this set to be connec-
ted to the mc-22s transmitter.
A momentary switch, Order No. 4160.11, or a
kick button, Order No. 4144, is required as a safe
means of transferring control.
If individual functions are to be transferred, the
functions are selected in the »Teacher/pupil«
menu (see page 115) of the Teacher transmitter,
which may be operated using any of the four mo-
dulations PPM18, PPM24, PCM20 or SPCM20.
CAUTION:
In contrast to the Trainer system described here,
a low-cost Trainer system, Order No. 3290, can
only be used for Trainer mode operations in PPM
mode; this version also requires a Pupil transmit-
ter which is fully set up to suit the model.
Suitable pupil transmitters:
D 14, FM 414, FM 4014, FM 6014, mc-10, mc-12,
mx-12 mc-14, mc-15, mc-16, mx-16s, mc-16/20,
mc-17, mc-18, mc-19, mc-20, mc-22, mc-22s, mx-
22 and mc-24.
The Pupil transmitter is always operated in its
basic (default) setting.
If the transmitter is an mc-series or mx-series
unit, select a model memory with the appropria-
te model type, assign it the “model name” of “Pu-
pil” and set up the stick mode to the suit the pupil
pilot’s preference. All other settings should be left
at their defaults. If the model type is “Fixed wing”,
the “Throttle min forward / back” in the “Motor” line
of the »Model type« menu should be set approp-
riately. If the model type is “Heli”, the throttle / col-
lective pitch direction and the idle trim should be
set to suit the pupil in the same way. All other set-
tings, such as mixer and coupling functions, are
carried out and transferred by the Teacher trans-
mitter.
If you are using a D 14, FM 414, FM 4014, FM
6014, FM 6014 / PCM 18 transmitter, you should
check the direction of servo rotation and stick
mode, and if necessary correct them by re-con-
necting the appropriate cables inside the transmit-
ter. Any mixers should either be switched off or set
to “zero”.
Connections in the mc-22s Teacher transmitter
Install the Teacher module in the transmitter case
at a suitable position. Connect the ten-pin plug at-
tached to the Teacher module to the adaptor, Or-
der No. 4184.1, or the interface distributor, Order
No. 4182.3.
The Trainer module, Order No. 3290.19, can be
connected directly to the interface on the transmit-
ter circuit board by means of the fourteen-pin con-
nector.
When you connect the Teacher transmitter to
a Pupil transmitter, locate the plug marked M
(Master) on the Trainer lead and connect it to the
Teacher module.
See the next page for a connection diagram for
the Teacher transmitter.
Connections in the mc-22s Pupil transmitter
Disconnect the connecting lead from the Pupil
module (it is not required with these transmitter ty-
pes).
Install the Pupil socket in the transmitter case in a
suitable position. Disconnect the four-pin connec-
tor attached to the RF module, and plug it into the
four-pin Pupil socket.
See the next page for a connection diagram for
the Pupil transmitter.
Teacher module for individual channel trans-
fer, mc-22(s) / mc-24
Order No. 3290.2
This expansion module is used to upgrade the
opto-electronic Trainer system, Order No. 3290, to
form a professional Trainer system with individu-
al channel transfer. To connect the module the mc-
22s transmitter must already be fi tted with the in-
terface distributor, Order No. 4182.3, or with the
mc-22(s) / mc-24 adaptor, Order No. 4184.1.
Teacher module for mc-19 / mc-22(s)
Order No. 3290.19
In contrast to the module, Order No. 3290.2, this
Teacher module features a fourteen-pin connector,
so that it can be connected directly to the transmit-
ter circuit board using the fourteen-pin interface.
Appendix
Trainer system with light-pipe lead or Eco lead Accessories
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 22S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 22S in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info