467112

Graupner MC 22S Manual

151
Zoom out
Zoom in
Previous page
1/180
Next page
151
Programming examples – Model helicopters
message will disappear.
The next step is to select a name for the model me-
mory you have chosen; the name is entered in the
menu …
»Base setup model« (page 50)
B A S I C S E T T I N G S , M O D E L
M o d e l n a m e < >
S t ic k m o d e 2
M o d u la t io
n P P M 1 8
T r im s t e p s 4 4 4 4
t
Your choice of “Model name” is entered virtually in
exactly the same way as the user name, which was
described on the left-hand page under »Basic set-
tings«.
Once you have entered the model name, you should
again check the basic settings (“Stick mode” and
“Modulation” in the »Basic settings« menu) you
have already programmed, while you can still change
them for the model memory you have selected.
Under “Trim steps” set the increment size for each
“click” of the digital trim levers. In the Heli model type
the Ch1 trim only affects the throttle servo. The thrott-
le trim has several special features (“motor cut-off
trim” etc.), but as they have already been described in
detail we will not go into them again here; please read
the sections on pages 32 and 62. Since the trims are
digital, the trim values are automatically stored when
you switch model memories.
We now come to the fi rst setting which is specifi c to
helicopters. Move to the menu ...
»Helicopter type« (page 53)
RIGHT
Under “Swashplate type” select the type of linkage
for the swashplate / collective pitch function; in our ex-
ample this is “3Sv(2roll)”.
In the “Rotor direction” line we set the direction of
rotation of the main rotor as viewed from above. This
means: clockwise or anti-clockwise – in our example
“right” (clockwise).
Check again that “Pitch min.” is set correctly, as it
is adopted from the »Basic settings« menu. Ensu-
re that the “forward” or “back” entry suits your perso-
nal preference.
We can safely ignore “Expo throttle lim.” for the mo-
ment.
At this point, if you have not already done so, the ser-
vos should be connected to the receiver in the follo-
wing order:
Please note one important difference in the mx-16s,
mc-19, mc / mx-22 and 22s and mc-24 compared
with previous GRAUPNER mc radio control systems:
the fi rst collective pitch servo and the throttle servo
7
6
5
4
3
2
1
8/Batt.
izer-MICRO-SUPERHET
1 6
FM
Best.-Nr.
7052
K
anal 60-282/182-191
a
s 35MHz/35MHz-B-Band
Made in Malaysia
S C A N
! #
Receiver battery
Y-lead, Order No. 3936.11 or 3936.32
(Speed governor)
(Gyro gain)
Throttle servo (speed controller - electric motor)
Free
Tail rotor servo (gyro system)
Pitch-axis servo
Roll 1 servo
Roll 2 servo
have been interchanged.
The Heli program automatically sets the mixer ratios
and mixer directions for the swashplate servos for col-
lective pitch, roll and pitch-axis to +61% in each case.
These settings are found in the menu ...
»Swashplate mixer« (page 111)
S E L
S W A S H M I X E R
P i t c h
+ 6 1 %
R o l l + 6 1 %
P i t c h a x . + 6 1 %
t
If the swashplate does not respond correctly to the
stick movements, the fi rst step is to change the mixer
directions from “+” to “–” if necessary. The second re-
course is to reverse the servo directions in the »Ser-
vo adjustment« menu.
Now move to the menu ...
»Servo adjustment« (page 56)
S e r v o 1 = > 0 % 1 0 0 % 1 0 0 % 1 5 0 % 1 5 0 %
S e r v o 2 = > 0 % 1 0 0 % 1 0 0 % 1 5 0 % 1 5 0 %
S e r v o 3 = > 0 % 1 0 0 % 1 0 0 % 1 5
0 % 1 5 0 %
S e r v o 4 = > 0 % 1 0 0 % 1 0 0 % 1 5 0 % 1 5 0 %
R e v c e n t . - t r a v e l + - li m i
t +
S E L
S E L S Y M A S Y S Y M
A S Y
t
… where you can set up the travels and directions of
rotation of the individual servos.
The basic aim here should be to keep servo travels
at +/-100% wherever possible, as this maintains best
possible resolution and accuracy. Use “Rev.” if neces-
sary to reverse the direction of rotation of any ser-
vo; do check carefully that the direction you set real-
ly is correct. The tail rotor servo must operate in such
a way that the nose (!) of the helicopter moves in the
same direction as the movement of the tail rotor stick.
… 151 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 22S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 22S in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info