747933
18
Zoom out
Zoom in
Previous page
1/51
Next page
18 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
Max. altude
Not applicable to receiver S1019.AIR and S1035 Falcon 12
In the value field of this line, a maximum height can be specified,
upon reaching which an alarm is triggered. Either in the form of the
"general alarm tone" of the transmier, a steady beeping in the
rhythm of about one second or the voice output "height".
Note
The height set in the value field of the "Maximum height" line
always refers to the height above the locaon when the receiver
system is switched on. Acvely used, this feature supports the com-
pliance with the various regulaons regarding the maximum al-
tude above ground.
PERIOD
If your system is used exclusively with digital servos, you can set a
cycle me (frame rate) of 10 ms. If using mixed or with the exclusive
use of analogue servos, it is essenal to select 20 ms. Otherwise,
analog servos will respond with "trembling" or "growling", even total
failure.
SUMD at channel X
SUMD SUMDI
S1019.AIR GR-18 HoTT (without vario) C6 ---
S1034 Falcon 12 plus C5 C6
S1035 Falcon 12 C5 C6
33579 GR-18 HoTT (with vario) C6 ---
33583 GR-24 Pro HoTT C8 C7
"No"
The receiver-specific connecon is suitable for operang a servo
or comparable RC components.
"Yes"
If the value field of this line has been set to "yes" and the relevant
receiver is subsequently put into operaon again, it permanently
generates a digital sum signal from the control signals of its con-
trol channels and makes this available at the receiver-specific
xed servo connecon. This type of signal was being used by
some of the newest flybarless systems and power supplies.
In conjuncon with another HoTT receiver, which has a SUM-
DI(N) input, it can also be used to create a simple or reciprocal
satellite connecon, see below.
33583 GR-24 PRO
RECEIVER 2.03
ALARM VOLT: 3.8V
ALARM TEMP: 70°C
Max. altitude: 0m
SUMD at C8: No
LANGUAGE: English
Ant1 100% Ant2 100%
Period: 20ms
Model type: Airplane
SUMDI at C7: No
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24 PRO in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-24 PRO

Graupner GR-24 PRO User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info