747933
17
Zoom out
Zoom in
Previous page
1/51
Next page
17 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
"Telemetry" menu
SETTING & DATA VIEW
TELEMETRY
SETTING & DATA VIEW
SENSOR
DISPLAY RF STATUS
SELECT ANNOUNCE
RX DATA ON
ALARM SETTING
The basic handling of the "Telemetry" menu is described in the
respecve transmier instrucons or the instrucons of the Smart-
Box. By way of derogaon, only in certain receivers the menu struc-
ture is summarized under the generic term "seng & data view".
These instrucons also provide informaon on how to access this
menu. Change accordingly to the rst seng page of the Falcon 12
(plus), GR-18 or GR-24 PRO HoTT receiver.
Note
The seng values shown in the following display illustraons always
show the standard values.
Display "Receiver"
Language
In the "Language" line is set the display language in the receiver
menu.
The choices are: German, English, French, Italian, Spanish
Ant1 and Ant2
The percentages behind "Ant1" and "Ant2" indicate how high the
receive power is in percent of the respecve antenna.
The display is mainly used to find the correct posion of the anten-
nas during the installaon.
Model Type
Depending on the selected model type "HELI" or "Airplane" dierent
menu pages are displayed.
ALARM VOLT
If the voltage of the receiver power supply falls below the set value,
a low-voltage warning is generated by the transmier in the form of
a "general alarm tone" (regular beeping at a rate of approx. one beep
per second) or the "receiver voltage" speech output message.
ALARM TEMP
If the receiver temperature exceeds the set temperature, a warning
is generated by the transmier in the form of a "general alarm tone"
(regular beeping at a rate of approx. one beep per second) or the
"receiver temperature" speech output message.
S1019.AIR GR-18 without
vario
RECEIVER 2.03
ALARM VOLT: 3.8V
ALARM TEMP: 70°C
SUMD at C6: No
LANGUAGE: English
C9: SERVO
Ant1 100% Ant2 100%
Period: 20ms
Model type: Airplane
S1034 Falcon 12 plus
RECEIVER 2.03
ALARM VOLT: 3.8V
ALARM TEMP: 70°C
Max. altitude: 0m
SUMD at C5: No
LANGUAGE: English
C5: SERVO
Ant1 100% Ant2 100%
Period: 20ms
Model type: Airplane
SUMDI at C6: No
S1035 Falcon 12
RECEIVER 2.03
ALARM VOLT: 3.8V
ALARM TEMP: 70°C
SUMD at C5: No
LANGUAGE: English
C5: SERVO
Period: 20ms
Model type: Airplane
SUMDI at C6: No
33579 GR-18 with vario
RECEIVER 2.03
ALARM VOLT: 3.8V
ALARM TEMP: 70°C
Max. altitude: 0m
SUMD at C6: No
LANGUAGE: English
C9: SERVO
Ant1 100% Ant2 100%
Period: 20ms
Model type: Airplane
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24 PRO in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-24 PRO

Graupner GR-24 PRO User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info