747933
14
Zoom out
Zoom in
Previous page
1/51
Next page
14 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
Binding
To establish a connecon with the transmier, the Graupner HoTT
receiver must rst be "bound" to at least one model memory in "its"
Graupner HoTT transmier. This process is generally called "bind-
ing". However, the method to be used is not always the same, which
is why the following step-by-step instrucons apply only to binding
the specified receivers to any transmier:
Receiver Falcon 12 (plus)
Binding step-by-step
If the receiver is already bound to a specific transmier and this
binding should be maintained, the transmier should ideally be
switched on before the receiver. At the latest, however, within
approximately 15 seconds from the moment when the receiver
is switched on, the red LED of the receiver is constantly on.
Aenon
As soon as the LED starts to flash, the receiver is in bind mode.
From this point on, there is a risk that the receiver inadvertently
binds to another HoTT transmier, which also happens to be in
the bind mode at the same me and in the same place, where-
upon the model can run uncontrolled at any me.
If the receiver is unbound or it should be bound to another trans-
mier or only the model memory has to be changed than the
previous one, proceed as follows:
1. Prepare the transmier or model memory to be bound accord-
ing to the instrucons for binding.
2. Switch the receiver power supply on.
3. The LED of the receiver Falcon 12 (plus) HoTT lights up con-
stantly red.
4. Approximately 15 seconds aer the receiver is switched on,
its red LED starts to flash, indicang that the receiver is now
in bind mode.
5. Start the transmier-side binding according to the instruc-
ons of the transmier.
6. If the red LED
of the receiver goes out within about three sec-
onds, the binding process has been completed successfully.
7. Your transmier/receiver combinaon is ready for operaon.
8. If the LED on the receiver remains sll red, the "binding" has
failed. Change the posions of the associated antennas and
try the enre procedure again.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24 PRO in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-24 PRO

Graupner GR-24 PRO User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info