747933
13
Zoom out
Zoom in
Previous page
1/51
Next page
13 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
Connecons
Connect the devices that have to be connected to the receiver to the
row of sockets on one end of the receiver. The servo connecons of
the Graupner-HoTT receiver are numbered.
The polarity of the plug-in system cannot be reversed. Do not apply
force.
Note
For the receivers Falcon 12 and 12 plus, insert the plugs with the
brown or black cable upwards.
Power supply
For the baery connecon are designated the ports provided with
an addional "B". With the excepon of connector 9 of the receiver
GR-18 HoTT, a baery can in principle be connected to any free
socket. By V- or Y-cable also with any remote control component. We
recommend that you connect the power supply to the socket(s)
close to the servos already connected to the receiver. If you wish to
connect mulple separate baeries, the baeries must be of the
same nominal voltage and capacity. Never connect dierent baery
types or baeries with strongly dierent charges since this can cause
an eect similar to a short circuit. In order to av
oid such eects from
the outset, voltage stabilizers such as PRX-5A receiver power sup-
plies (No. 4136) should always be connected between the baeries
and the receiver in such cases.
Aenon
When selecng and connecng a power supply, be aware that
although the operang range of the receiver ranges from 3.6 to 8.4
V. However, praccally all of the previously marketed servos, speed
controllers, gyros, etc. as well as many which are oered today have
a permissible operang voltage range of 4.8 to 6 V.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24 PRO in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-24 PRO

Graupner GR-24 PRO User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info