747932
22
Zoom out
Zoom in
Previous page
1/51
Next page
22 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
TRAVEL –/+
In these two lines you can define the mixer rao in relaon to the
source channel (FROM CHANNEL); the value is set separately for
both direcons.
Programming examples
V-tail with rudder dierenal
FREE MIXER
FROM CHANNEL: 3
TRIM: +0%
TRAVEL–: +100%
MIXER 1
TRAVEL+: +100%
TO CHANNEL: 4
FREE MIXER
FROM CHANNEL: 4
TRIM: +0%
TRAVEL–: +60%
MIXER 2
TRAVEL+: +100%
TO CHANNEL: 3
FREE MIXER
FROM CHANNEL: 4
TRIM: +0%
TRAVEL–: +100%
MIXER 3
TRAVEL+: +60%
TO CHANNEL: 4
Dierenal is not normally necessary with this tail type. Mixer 3 is
not required if you do not need rudder dierenal, and TRAVEL for
mixer 2 must then be set to +100%.
Alternavely you may prefer to carry out the programming using the
transmier menu. A ‘Rudder -> elevatormixer can be set up at the
transmier instead of ‘Free mixer 3’ at the receiver. This opon frees
up one mixer at the receiver.
Delta with aileron dierenal
FREE MIXER
FROM CHANNEL: 2
TRIM: +0%
TRAVEL–: +100%
MIXER 1
TRAVEL+: +60%
TO CHANNEL: 3
FREE MIXER
FROM CHANNEL: 3
TRIM: +0%
TRAVEL–: +100%
MIXER 2
TRAVEL+: +100%
TO CHANNEL: 2
FREE MIXER
FROM CHANNEL: 2
TRIM: +0%
TRAVEL–: +60%
MIXER 3
TRAVEL+: +100%
TO CHANNEL: 2
In this example aileron dierenal is set to 40%. Alternavely you
may prefer to carry out the programming using the transmier
menu. An ‘Aileron -> elevator’ mixer can also be set up at the trans-
mier instead of ‘Free mixer 3’ at the receiver. This opon frees up
one mixer at the receiver.
Two elevator servos
(channel 6 for the second elevator servo)
FREE MIXER
FROM CHANNEL: 3
TRIM: +0%
TRAVEL–: +100%
MIXER 1
TRAVEL+: +100%
TO CHANNEL: 6
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-18 in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-18

Graupner GR-18 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info