637250
14
Zoom out
Zoom in
Previous page
1/20
Next page
14 - 20
GR-10C_jh_V1
Axis assignment
Setup: Setup: Yes/No
Assignment of the gyros and their operating direction.
In the receiver’s “Axis assign” menu, go to the “Setup” option
and set it to “Setup: Yes”. Now assign the axes as follow:
On the transmitter, briefly set the roll command fully to the right;
the roll axis is highlighted. Roll the copter more than 45 degrees
to the right the identified axis with the required prefix is dis-
played, the field is no longer highlighted and identification of this
axis is complete.
Now do the same for nick: on the transmitter, briefly set the nick
command so that it is fully forward. Roll the copter more than
45 degrees forwards; the axis is displayed, the field is no longer
highlighted and identification of this axis is complete.
Finally complete the procedure for yaw: on the transmitter, briefly
set the yaw command fully to the right. Turn the copter so that
the nose turns more than 45 degrees to the right; the axis is dis-
played, the field is no longer highlighted and identification of this
axis is complete.
The gyros and operating directions have now been assigned.
Now check to make sure that the operating directions are cor-
rect.
To do this remove the propeller of the copters and give
approximately a quarter throttle, all motors are running at
the same speed.
Tilt the Copter in Attitude mode so that its nose is facing
downwards
the front motors must turn faster than back
ones. Tilt the Copter in Attitude mode to one side
the
motors of the side, in witch you tilt the model, must turn
faster then the motors on the other side.
Axis assignment <
>Setup No
ROLL +0
NICK +0
YAW +0
Step 3
Axis assignment in the gyro
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-10C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-10C in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info