738276

Grasslin Talis II PC 40-5-1i Manual

8
Zoom out
Zoom in
Previous page
1/36
Next page
8
Switching capacity
Incandescent lamp load max. 2200W
Halogen lamp load (AC) max. 2200W
Halogen lamp load (LV) max. 1200VA / 1000W
Fluorescent lamp load max. 1200VA / 140μF
LED lamp / energy-
saving lamp
max. 800VA / 600W
Installation and assembly
Packaging content and options
See Fig. 1
Dimensions
Fig. 2 Detector
Fig. 3 On-wall mounting with on-wall box talis
II SM BOX 20
Fig. 4 Suspended ceiling mounting with inter-
mediate unit talis II FC BOX 20
Location/installation (Fig. 5/6)
• Avoid installing the presence detector in the
vicinity of
− Source of heat (fan heaters, air-condition-
ing units, lighting etc.)
− Objects with reflective surfaces (mirrors
etc.)
− Objects that may be moved by the wind
• Avoid direct sunlight.
• The recommended installation height is
2.5m.
Lens shield
You can shield off undesired areas of detection by
attaching the enclosed lens shield to the lens.
Use scissors to cut the lens shield horizontally or
vertically until you achieve the desired detection
range.
Wiring diagram
Fig. 7 A connected load is controlled by a
presence detector.
Fig. 8 The connected load is switched on for
an adjustable period of time, either by
the presence detector or by the stair-
case lighting time switch. The “TIME”
rotary knob must be set to
.
• If inductors are switched (e.g. relay, gate,
ballasts), it may be necessary to use a
quenching circuit.
• Parallel switching of a max. of 10 devices.
Installation
WARNING: Disconnect the voltage and secure it
against reconnection!
• Flush mounting
See Fig. 9/10 for the procedure
• Suspended ceiling mounting
with intermediate unit talis II FC BOX 20
See Fig. 11/12/13 for the procedure
• On-wall mounting
with on-wall box talis II SM BOX 20
See Fig. 14/15/16 for the procedure
Function test
• The sensor needs approx. 60sec. starting
time.
• Switch the “TIME” rotary knob to “TEST” and
carry out the function test.
• Note the movement type (Fig. 6).
• The LED and the load are switched on for
3sec. each time movement is detected and
switched off 2sec. before the next detection.
• After the function test, stet the “TIME” rotary
knob to the desired value.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grasslin Talis II PC 40-5-1i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grasslin Talis II PC 40-5-1i in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info