738276
7
Zoom out
Zoom in
Previous page
1/36
Next page
EN
7
Safety
Risk of fatal electric shock!
Only allow a qualified electrician to
install and connect the device.
WARNING!
Before installing the product, disconnect the
mains voltage!
Before installation, a type C circuit breaker
(250VAC, 10A) should be installed, in
accordance with EN60898-1.
When lamps from some manufacturers burn
out, they can cause a high inrush current,
which can permanently damage the detector.
Observe the national regulations and safety
conditions.
Interventions in and modications to the
device shall result in loss of warranty and
guarantee.
Read and observe this manual in order to ensure
trouble-free functioning of the device and safe
work.
For more information:
http://qrc.graesslin.de/801015297
Information about the device
Description of the device
The presence detector operates on the principle of
passive infra-red sensors (PIR sensor). It automat-
ically regulates the connected loads according to
whether persons are present (movement detection)
and according to the ambient brightness. The
built-in light sensor continuously measures the
strength of daylight and the system compares this
against the set lux value.
The light remains switched on for as long
as movement and insufficient daylight are
detected.
After the last movement is detected, the
lighting remains switched on for the set
run-on time.
The lighting switches off automatically as
soon as sufcient ambient brightness is
reached, even if movement is detected during
this time.
The presence detector is suitable for use in
indoor spaces.
Technical data
Supply voltage 230V~ ±10% 50/60Hz
Detection range 360°
Range approx. 5 x 40m (Fig. 6)
Time setting approx. 30sec. – 30min.;
TIME
Test1s
5m
5s
15m
30m
LUX
10
100
300
2000
METER
; test
Light value
approx. 10 lux – “
”;
” = learning mode
Ambient temperature -20°C to +45°C
Protection class II
IP code IP20
IP54 for on-wall mounting
Energy consumption < 1W (in standby mode)
Operating manual
talis II PC 40-5-1i – presence detector
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grasslin Talis II PC 40-5-1i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grasslin Talis II PC 40-5-1i in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info