505353
43
Zoom out
Zoom in
Previous page
1/54
Next page
FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 43 OF 54
Hunting Group
Type
Linear and Circular. Linear style will sort the call to the lowest-numbered available line, this is
also called “serial hunting”. Circular style will distribute the calls "round-
robin". If a call is
assigned to line 1, the next call goes to 2 and t
he next to 3. The succession throughout each
of the lines continues even if one of the previous lines becomes available. When the end of
the hunt group is reached, the hunting starts over at the first line. Lines are skipped if they are
still busy on a pre
vious call. These two hunting styles can be configured from the Profile_x
page.
Delayed Call
Forward Wait
Timeout
Default value is 20 seconds. In case this feature activated using * codes (*92 code), the call
will be forwarded after this preconfigured amount of time.
No Key Entry
Timeout
Default is 4 seconds. Call will be completed within this time interval if no additional key entry
occurs.
Early Dial
Default is No. Use only if proxy supports 484 response. This parameter controls whether the
phone wi
ll send an early INVITE each time a key is pressed when a user dials a number. If
set to “Yes”, an INVITE is sent using the dial-
number collected thus far; Otherwise, no
INVITE is sent until the “(Re-)Dial” button is pressed or after about 5 seconds have
elapsed if
the user forgets to press the “Re-
Dial” button. The “Yes” option should be used ONLY if there
is a SIP proxy configured and the proxy server supports 484 Incomplete Address response.
Otherwise, the call will likely be rejected by the proxy (with a 404 Not Found error).
This feature is NOT designed to work with and should NOT be enabled for direct IP-to-
IP
calling.
Dial Plan Prefix
Sets the prefix added to each dialed number.
Use # as Dial Key
Allows users to configure the “#” key as the “Send” (or “Dial”) key. If set to “Yes”, “#” will send
the number. In this case, this key is essentially equivalent to the “Dial” key. If set to “No”, this
“#” key can be included as part of number.
Dial Plan
Dial Plan Rules:
1. Accept Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d
2. Grammar: x - any digit from 0-9;
a. xx+ - at least 2 digits number;
b. xx. – at least 2 digits number;
c. ^ - exclude;
d. [3-5] - any digit of 3, 4, or 5;
e. [147] - any digit 1, 4, or 7;
f. <2=011> - replace digit 2 with 011 when dialing
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grandstream GXW4248 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grandstream GXW4248 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info