505360
37
Zoom out
Zoom in
Previous page
1/51
Next page
Alarm Event Page
The GXV3651_FHD supports alarm inputs, for example, infrared detector, smoke detector and so on.
Follow the steps to make Alarm Input work:
1. Connect the alarm input equipment to the GXV3651_FHD.
2. Set up the alarm event time schedule.
3. Configure the alarm actions which you would like the GXV3651_FHD to take when the alarm is
triggered.
This page allows user to configure alarm event:
Figure 21 Alarm Event Setting Page
How Alarm Input and Alarm Output Work
Alarm-in is the alarm input port; users are able to connect sensors such as infrared sensor (PIR), smoke sensor or
light sensor to it. The detectable signal voltage range for alarm-in is from 1.8V to 15 V
NOTE:
Please do not connect a device that has a signal voltage that is higher than 15V, this will damage
the IP camera
.
Internally, the Alarm-out uses relays as a switch (30VAC/2A); users can connect devices such as an alarm siren, alert
lights or electric strike to this port. Under normal circumstances, the circuit is open. When there is an alarm event,
the GXV3651_FHD will close the circuit to trigger the alarm.
Grandstream Networks, Inc.
GXV3651_FHD User Manual
Page 37 of 51
Firmware Version 1.0.1.71
Last Updated: 3/2013
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grandstream GXV3651FHD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grandstream GXV3651FHD in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info