715586

Graef SKS 501 Manual

25
Zoom out
Zoom in
Previous page
1/112
Next page
25
DE
EN
FR
NL
IT
ES
DK
PL
especially are at risk.
- Never reach into the space between the stop plate and blade as
long as the stop plate is not completely closed, i.e. set to
(below
„0“).
- Do not touch the blade with your ngers.
Using the standard holder for remainders
The unit must not be used without the end-piece holder, unless the
size and shape of the slicing material does not allow its use.
1. Insert the plug into the socket.
2. Place the slicing material on to the slide
4
.
3. Place the holder for remainders
8
on the rear wall of the slide at the slicing
material.
4. Set the requested cutting thickness
5
.
5. Place the cutter tray
7
below the unit.
6. Either hold the intermittent switch
6
pressed or press the intermittent
switch
6
and slide it downward in order to switch to permanent operation.
7. Press the slicing material lightly against the stop.
8. Evenly move the slide towards the blade
3
.
9. After completing the cutting process, either release the intermittent switch
6
or slide the switch upward again.
TIP:
● Soft slicing material (such as cheese or ham) can be cut best when chilled.
● Soft slicing material can be cut better when moved forward slowly.
After a continuous operation of 10 minutes, let the motor cool
down for an hour.
Child protection
To secure the blade
4
(stop plate must be closed, i.e. positioned below “0”),
push the slide
4
in front of the blade
3
and press the slide latch
9
in.
The slide
4
is secured. To enable the child-proof safety catch, the adjustment
knob must be turned clockwise past the zero setting up to the limit. Now push
the safety slide to the outside as far as possible. The adjustment knob and on/off
switch are not blocked.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graef SKS 501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graef SKS 501 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info