468827
10
Zoom out
Zoom in
Previous page
1/44
Next page
10
EN
erly installed protective conductor
system. Operation on a socket with-
out a protective conductor is prohib-
ited. If in doubt, have the building
installation checked by an electrician.
The manufacturer does not assume any
responsibility for damages caused by a
missing or interrupted protective con-
ductor.
Before the rst use
Remove the protective cap between
the base station and the tank. Before
using the unit for the rst time, clean
as described in the Cleaning chapter.
IMPORTANT!
Let the unit cool off between uses.
Making milk froth
Connect the unit to the mains supply:
Remove the cap and insert the attach-
ment for warm
or cold
milk froth.
Fill the desired amount of milk in the
tank.
IMPORTANt!
Comply with the “max” mark.
Never ll any more milk than that
into the tank. Frothed milk ex-
pands; if the lling level is too high
it will overow the tank.
Put the cap on the tank.
Start preparation by pressing the corre-
sponding “on” button. The LED is illu-
minated as long as the unit is running.
IMPORTANT!
Preparation stops automatically
after 60 - 90 seconds, depending
on the lling level.
Open the cap after preparation has n-
ished and pull it up.
Pour or ladle the milk froth into a cup
or glass.
After using the unit, clean it as de-
scribed in the Cleaning
Warming up milk
Warming up milk differs from making
milk froth in the following points:
Remove the attachment for milk froth.
Fill the desired amount of milk in the
stainless steel tank.
The rest of the steps are identical to
making warm milk froth.
Cleaning
Clean the exterior of the unit with a
soft, moist cloth. If heavily soiled, a
mild detergent can be used.
Rinse out the tank with hot water after
use. If there is stubborn soiling in the
inside of the stainless steel tank, wash
it out with a soap solution and rinse
thoroughly.
Disposal
At the end of its service life, this prod-
uct must not be disposed through nor-
mal domestic waste; rather it must be
disposed at a collection point for recy-
cling electronic domestic refuse. The
symbol on the product and in the op-
erating instructions points this out. The
materials can be recycled in accordance
with their markings. By recycling, mak-
ing use of the materials or other forms
of recycling old units you are making
an important contribution to protect-
ing our environment. Please ask your
municipal administration about the re-
sponsible disposal sites.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graef MS 61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graef MS 61 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info