468827
9
Zoom out
Zoom in
Previous page
1/44
Next page
9
© Gebr. Graef GmbH & Co. KG
EN
Follow the instructions regarding the
requirements for the place of instal-
lation and on the unit’s electrical con-
nection to prevent personal harm and
property damage.
Never touch rotating parts of the unit.
Never put objects or body parts in the
unit while it is running.
Never leave the unit unsupervised dur-
ing operation.
Fill the unit only up to the respec-
tive mark. If overlled, hot liquid can
emerge from the tank.
Unpacking
To unpack the unit, proceed as below:
Take the unit out of the carton.
Remove all pieces of the packing.
Remove any possibly extant labels from
the unit (do not remove the rating
plate).
Requirements for the installation
location
For safe and awless operation of the
unit, the place of location must meet
these prerequisites:
The unit must be set up on a rm, at,
level, non-slip and heat resistant base
that has sufcient load bearing capac-
ity.
Select the place of location so that chil-
dren cannot reach the hot surfaces of
the unit.
The unit is not intended for installation
in a wall or a built-in cupboard.
Do not set up the unit in a hot, wet or
moist environment.
The electric socket must be readily ac-
cessible so that the power cord can be
easily unplugged.
Electric connection
Follow these instructions about the
electrical connection for safe and aw-
less operation of the unit:
Before connecting the unit, compare
the connection information (voltage
and frequency) on the rating plate with
those of your electrical network. This
information must match to avoid dam-
age to the unit. If in doubt, ask your
electrician.
The socket must be fused with at least
a 10A circuit breaker.
Make sure that the power cord is not
damaged. Do not conduct it over hot
surfaces or sharp edges.
The connector cable must not be pulled
tight.
The electrical safety of the unit is only
ensured if it is connected to a prop-
erly installed protective conductor
system. Operation on a socket with-
out a protective conductor is prohib-
ited. If in doubt, have the building
installation checked by an electrician.
The manufacturer does not assume any
responsibility for damages caused by a
missing or interrupted protective con-
ductor.
Electric connection
Follow these instructions about the
electrical connection for safe and aw-
less operation of the unit:
Before connecting the unit, compare
the connection information (voltage
and frequency) on the rating plate with
those of your electrical network. This
information must match to avoid dam-
age to the unit. If in doubt, ask your
electrician.
The socket must be fused with at least
a 10A circuit breaker.
Make sure that the power cord is not
damaged. Do not conduct it over hot
surfaces or sharp edges.
The connector cable must not be pulled
tight.
The electrical safety of the unit is only
ensured if it is connected to a prop-
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graef MS 61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graef MS 61 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info