712131
23
Zoom out
Zoom in
Previous page
1/156
Next page
23
DE
EN
FR
NL
ES
IT
DK
PRIOR TO FIRST USE
Before rst use, clean the strainer support (not the unit) and the water tank under
running water to remove any production residue.
AUTO SWITCH-OFF (STAND BY)
After a long period of non-use, the unit switches to standby mode. To switch the
unit on again, turn the rotary knob briey to the left and back again to the centre
or press the on/off switch.
INITIAL OPERATION
CAUTION
Observe the following safety instructions to prevent hazards and material dam-
age:
During use, the surfaces become hot!
While water is running through the machine, never remove the group handle
lled with coffee grounds, because it is under pressure.
Before preparing the espresso, check that the strainer support is rmly tight-
ened.
To avoid potential hazards, use the unit only for coffee preparation and frothing
milk. Any other use is not permitted.
INSERTION OF THE STRAINER INSERT
Place the desired strainer insert in the strainer support. Make sure that the recess
on the strainer insert is on the recess in the strainer support. Then turn the strainer
insert a quarter of a turn to the right. The strainer insert now sits loosely in the
strainer support, but does not fall out.
PREPARATION
The following steps are used to warm up the strainer support, the strainer insert
and the cups.
Switch the unit on. If the control lamp lights up permanently, the unit is ready
for operation.
Fill the water tank with water (maximum 1.25 litres).
Place the desired strainer insert in the strainer support.
Place the strainer support without coffee powder under the brewing head. The
handle of the strainer support must point to the
position. Hold the unit rmly
and turn the handle of the strainer support to the right. The handle must now
point to the
position.
Put a cup below the outlet.
Turn the rotary knob to the left.
Let the cup run half full, to bring the system to desired temperature.
Turn the rotary knob back to centre position.
Empty the cup.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graef ES403 Salita at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graef ES403 Salita in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info