Manual Graco Turn2Me (page 10 of 69) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

768345

Zoom out

Zoom in

1/69

16 17

 Press the webbing adjustment

button﹐ while pulling out the

shoulder harnesses to the

proper length.

 Unlock the buckle of the

harnesses by pressing the red

button.

 Fix the buckles on the both

sides of seat to make placing the

child in rear facing mode more

convenient.

 Use Infant insert is for children’s

protection.

The cushion can be used separately

without being attached to the

insert to bolster the infant's back

for more comfort.

Remove the

infant insert

cushion by

detaching the

snaps to allow

more space

when the

infant does

not ﬁt

comfortably.

Remove the head support portion

of the infant insert when the child’s

head no longer ﬁts comfortably.

Remove the body portion of the

infant insert when the infant’s

shoulders no longer ﬁt comfortably.

Detach the snaps on the head

support to remove the head portion

of the insert.

We recommend using the full infant

insert while the baby is 0-6 months

or until they outgrow the insert. The

infant insert increases side impact

protection.

and pull the base back from the

vehicle seat.

 Press the rotating button to

rotate for easier side loading/

unloading of the child﹐ then

rotate forwards to desired

direction.

 If a tighter install or increased

cabin space is required﹐ then

press the ISOFIX adjuster button

and push to adjust.

 The ISOFIX connectors must be

attached and locked onto the

ISOFIX anchor points.

The load leg must be installed

correctly with green indicator.

After the child is placed into the seat﹐

check whether the Shoulder Harness

Straps are at proper height.

 Press the webbing adjustment

button﹐ while pulling out the

shoulder harnesses to the

proper length.

 Unlock the buckle of the

harnesses by pressing the red

button.

 Fix the buckles on the both sides

of seat to make placing the child

in forward facing mode more

convenient.

When installing the child restraint in

the forward facing mode﹐ do not use

the infant insert.

Place the child into the child restraint

and pass both arms through the

harnesses.

After the child is seated﹐ recheck

whether the shoulder harnesses are

at the proper height.

 Engage the buckle.

 Pull down the adjustment

webbing and adjust it to the

proper length to make sure your

child is properly secured.

Make sure the space between the

child and the Shoulder Harness

Straps is about the thickness of one

hand.

If steps    are taken when

arriving at your destination whilst

removing the child﹐ then the harness

will be positioned so that it is out of

the way and ready for loading upon

your return to the vehicle.

Using in the

Forward Facing

Mode

(Forward Facing Mode/for Child

between 9-18kg / 9 months -4

years old)

See images  - 

Please install the child restraint on

the vehicle seat﹐ and then put the

child in the child restraint.  - 

 Press the ISOFIX adjuster button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graco Turn2Me in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graco Turn2Me Manual

Product: