768345
9
Zoom out
Zoom in
Previous page
1/69
Next page
14 15
This child restraint is suitable for
vehicle seats with ISOFIX anchor
points.
Installation
with base
See images - 
Fit the ISOFIX guides with the
ISOFIX anchor points.
The ISOFIX guides can protect
the surface of the vehicle seat
from being torn. They can also
guide the ISOFIX connectors.
After placing the base on the
vehicle seat﹐ pull the load leg
downward to floor.
There are 10 adjustable positions
for ISOFIX. Press the ISOFIX
adjuster button to extend the
ISOFIX.
Make sure that both ISOFIX
connectors are securely attached
to their ISOFIX anchor points.
The colors of the indicators on
both ISOFIX connectors should
be completely green.
If a tighter install or increased
cabin space is required﹐ then
press the ISOFIX adjuster button
-1 and push to adjust.
After attaching the ISOFIX﹐ pull
the load leg downward to floor.
When the load leg indicator
shows green﹐ the load leg is
installed correctly. Squeeze the
load leg releasing button﹐ then
adjust the load leg length.
The load leg has 12 positions.
When the load leg indicator
shows red this means the load
leg is in the wrong position.
Make sure the load leg is in full
contact with the vehicle floor
pan. Red means it is installed
incorrectly.
 Check to make sure the base is
securely installed by pulling on
both ISOFIX connectors.
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
The load leg must be installed
correctly with green indicator.
Please refer to rear facing mode
and recline positions mode in
section to use the child restraint.
 To remove from the vehicle
press the ISOFIX adjuster button
and pull the base back from the
seat.
 Then press and release the
connectors from the vehicles
ISOFIX.
 To prevent damage during
transit﹐ press the ISOFIX adjuster
button and fold the connector
completely.
Recline Adjustment
See image 
 Squeeze the recline adjustment
button ﹐ to adjust the child
restraint to the proper position.
Please recheck the load leg
position after reclining.
There are 5 recline positions for
rear facing mode and 5 recline
positions for forward facing
mode.
Height Adjustment
for Head Support and Shoulder
Harnesses
See images  - 
Please adjust the head support
and check if the shoulder
harnesses are at the correct
height according to  .
When used rear facing﹐ the
shoulder harness height must be
even with child’s shoulders.
When used forward facing﹐ the
shoulder harness height must be
even with child’s shoulders.
 Squeeze the head support
adjustment lever meanwhile
pull up or push down on the
head support until it snaps into
one of the 6 positions. 
Using in the Rear
Facing Mode
(Rearward Facing Mode/for Child
under 18kg /infant - 4 years old)
See images  - 
Please install the child restraint on the
rear vehicle seat﹐ and then put the
child in the child restraint. -
 Press the ISOFIX adjuster button
and pull the base back from the
vehicle seat.
 Press the rotating button to
rotate for easier side loading/
unloading of the child﹐ then
rotate back to desired direction.
 If a tighter install or increased
cabin space is required﹐ then
press the ISOFIX adjuster button
and push to adjust.
 The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
The load leg must be installed
correctly with green indicator.
After the child is placed into the seat﹐
check whether the Shoulder Harness
Straps are at proper height.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graco Turn2Me at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graco Turn2Me in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info