30
7. After approximately 5–6 minutes, you can open the appliance to check whether the ome-
lette is ready for you, or needs to be cooked for longer.
8. Remove your omelette with a wooden or plastic kitchen utensil to avoid damaging the
coating.
9. If you do not want to make any more dishes, remove the plug from the socket and leave the
appliance to cool down completely before removing the plates, cleaning them and storing
them with the appliance.
Doughnut plates
Inserting these plates allows you to make delicious doughnuts.
1. Insert the doughnut plates as shown in the ‘Inserting and exchanging plates’ chapter.
2. The appliance must be connected only to properly installed mains sockets. The red control
light illuminates as soon as the appliance is connected to a mains socket.
3. The appliance now needs to pre-heat. Keep the appliance closed while it is heating up. The
appliance takes around 3–5 minutes to pre-heat, and is ready when the green control light
illuminates.
4. When the green power LED illuminates and the pre-heating process has ended, release the
latch and open the device.
5. Now pour your doughnut mix into the hollows in the bottom doughnut plate and close the
appliance. Make sure that you do not overfi ll the doughnat plates to prevent leakage.
6. When closing the appliance, ensure that the locking catch clicks fully into place. When cook-
ing, the green control light may switch off and on. If the green light comes on, it means that
the appliance is re-heating in order to maintain a constant temperature.
7. After approximately 5–6 minutes, you can open the appliance to check whether the dough-
nuts are ready for you, or need to be cooked for longer.
8. Remove your doughnuts with a wooden or plastic kitchen utensil to avoid damaging the
coating.
9. If you do not want to make any more dishes, remove the plug from the socket and leave the
appliance to cool down completely before removing the plates, cleaning them and storing
them with the appliance.
