29
7. After approx. 5–6 minutes open the device to check whether the waffl es have already been
baked to perfection or whether they need to be baked longer.
8. When the waffl es are done, use wooden or plastic kitchen utensils to remove them to
prevent damage to the coating.
9. If you do not plan to bake any other waffl es, pull the mains plug out of the socket and let the
device cool off completely before you remove and clean the plates and store them together
with the device.
Flat grill plates
These plates can be used to prepare pancakes, eggs, bacon and sausages, etc.
1. Insert the fl at grill plates as shown in the ‘Inserting and exchanging plates’ chapter.
2. The appliance must be connected only to properly installed mains sockets. The red control
light illuminates as soon as the appliance is connected to a mains socket.
3. The appliance now needs to pre-heat. Keep the appliance closed while it is heating up. The
appliance takes around 3–5 minutes to pre-heat, and is ready when the green control light
illuminates.
4. When the green power LED illuminates and the pre-heating process has ended, release the
latch and open the device.
5. Now place the food you want to cook on the bottom grill plate. You can prepare food either
with the grill open, or closed. Use only wooden or plastic kitchen utensils to remove your
food to avoid damaging the coating.
6. When closing the grill, ensure that the locking catch clicks fully into place. When grilling,
the green control light may switch off and on. If the green light comes on, it means that the
appliance is re-heating in order to maintain a constant temperature.
7. Please note that cooking times need to be extended if grilling with the appliance open.
8. If you do not want to make any more dishes, remove the plug from the socket and leave the
appliance to cool down completely before removing the plates, cleaning them and storing
them with the appliance.
Omelette plates
Inserting these plates allows you to make delicious omelettes.
1. Insert the omelette plates as shown in the ‘Inserting and exchanging plates’ chapter.
2. The appliance must be connected only to properly installed mains sockets. The red control
light illuminates as soon as the appliance is connected to a mains socket.
3. The appliance now needs to pre-heat. Keep the appliance closed while it is heating up. The
appliance takes around 3–5 minutes to pre-heat, and is ready when the green control light
illuminates.
4. When the green power LED illuminates and the pre-heating process has ended, release the
latch and open the device.
5. Now pour your egg mixture onto the bottom omelette plate and close the appliance. Make
sure that you do not overfi ll overfi ll the omelette plate to prevent leakage.
6. When closing the appliance, ensure that the locking catch clicks fully into place. When cook-
ing, the green control light may switch off and on. If the green light comes on, it means that
the appliance is re-heating in order to maintain a constant temperature.
