562298
16
Zoom out
Zoom in
Previous page
1/36
Next page
16
3. Open the lid and if applicable, grease the baking surfaces slightly before baking for the rst
time.
4. Heat up the device: Connect it to a properly installed socket. The red indicator light will
illuminate as soon as the device has been connected to a socket. The green indicator light
illuminates when the device has reached operating temperature. Always keep the device
closed when it is heating up.
5. The device reaches its operating temperature after approximately 3 4 minutes when the
green indicator light turns on. Please note: The green indicator lights turns off during fur-
ther operation and then turns back on at regular intervals. This is not a malfunction, but sim-
ply indicates that the device is heating up again or interrupting the heating process in order
to maintain a constant operating temperature.
6. Fold up the lid once the device has reached its operating temperature.
7. Place the prepared batter in the moulds in the lower baking surface. The moulds in the lower
baking surface should be adequately lled. The exact amount of batter that needs to be lled
in the baking moulds depends on the consistency of the batter and can best be determined
by performing a test baking cycle. Don't be discouraged if the rst baking attempt doesn't
turn out perfect!
8. Carefully close the lid and let the popcakes bake for approximately 6 – 8 minutes.
9. Open the lid to check whether the popcakes have been baked according to your wishes or
whether they need to be baked more.
10. When the popcakes are done, use wooden or plastic kitchen utensils to carefully remove
them and place them on the enclosed rack so they can cool.
11. Fill the device again in order to bake more popcakes.
12. If you do not want to bake more popcakes, pull the plug out of the socket and let the device
cool off completely in an open state before you clean and stow it (see chapter “Cleaning and
storage”).
Decorating popcakes
For best results, let the popcakes cool off before you decorate them.
The popcakes can be eaten pure or they can be coated with chocolate or another
cake icing.
1. Prepare the icing.
2. Insert the enclosed sticks in the popcakes.
This works best when the popcakes are on the enclosed rack and you quickly dip the stick
in the prepared icing before inserting it in the popcakes. This ensures that the popcake safely
stays on the stick. Let the icing dry brie y before you decorate the popcake in the next step.
3. Now coat the popcake with icing by dipping it in the icing. Let your
imagination decide what other decorations you need: For example, try
adding coloured or chocolate sprinkles for more decoration.
4. To improve drying of the icing, stick the popcake with the stick in the
popcake rack (see image) so that it stays upright.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx Z 04486 - TX-103XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx Z 04486 - TX-103XT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info