562298
15
Zoom out
Zoom in
Previous page
1/36
Next page
15
1. Remove the device from the packaging and remove all wrappers and stickers. Check the
device for transport damages. If the device is damaged, do not use it (!), instead contact
customer service.
2. Clean the device's baking surfaces with a soft, damp cloth/sponge and, if applicable, a small
amount of detergent. Dry the device with a soft dish towel.
3. Place the device on a dry, heat-resistant and level surface at a suf cient distance to other
objects or the wall.
4. Insert the mains plug in a 230 V earthed socket with earthing contacts which has been in-
stalled in compliance with regulations. Make sure that the cord is not caught between
the baking surfaces! The device is now heating up. Let it heat up for a few minutes to
remove any production residue.
5. Turn the device off by pulling the mains plug out of the socket.
6. Allow the device to cool off and then clean it again.
Use
ATTENTION!
Burn hazard! The device's baking surfaces get very hot. When lling the baking surfaces and
when removing the popcakes, be careful not to touch the baking surfaces!
The device must always be in a horizontal position during operation and the lid must be
closed.
Scalding hazard! Steam may be emitted from the device. Be careful when opening or
closing the device.
Place the device in a location where there is no risk of falling or getting pulled down by the
cord! Children and animals must be under supervision to ensure that they do not play with
the device!
Do not slide the device across the surface it is standing on in order to avoid abrasion of the
feet.
Do not use metallic kitchen utensils or other sharp edged objects to remove the popcakes
in order to not damage the non-stick coat of the baking surfaces!
Make sure that you do not over ll the device! Excess batter may ow out on the sides of the
device. Furthermore, the device should generally be easy to close. Do not forcefully attempt
to close the device!
The baking surfaces have a non-stick coat. However, for best results, we recommend
that you grease it lightly with cooking oil or fat before baking for the rst time. Do not
use cooking spray as it may damage the non-stick coat!
Baking popcakes
1. Prepare the batter according to your wishes. You can nd a recipe suggestions in the chapter
“Basic batter recipe”.
2. Place the device on a dry, heat-resistant and level surface at a suf cient distance to ammable
objects. If necessary, place a heat-resistant base under the device.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx Z 04486 - TX-103XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx Z 04486 - TX-103XT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info