562009
25
Zoom out
Zoom in
Previous page
1/64
Next page
25
The coffee is very hot when it has just brewed. Be careful when pouring. You could
scald yourself.
The hotplate gets very hot. Do not touch it when the device is switched on or shortly
after it has been switched off.
Do not ll water any higher than up to the max marking as otherwise water can spray
out during brewing.
Never place the coffee pot on a hot stovetop or other hot surfaces.
Never leave the empty coffee pot on the hotplate as it could shatter. Never use the
device if the coffee pot shows signs of cracks. Only use the coffee pot with this de-
vice. Use it very carefully; it is fragile.
Do not operate the device without water in it or with less water than is required to
reach the minimum marking.
The lid of the coffee pot must be closed during the brewing process so that the cof-
fee can trickle into the pot.
1. If you have not already done so, place the coffee machine on a dry, at, solid and
heat-resistant surface and plug the mains plug into a properly installed plug socket.
2. Flip up the lid of the water reservoir and use the coffee pot to pour water into the
water reservoir. Make sure that the amount of water is between the minimum and
max marking.
3. Place the coffee pot with the lid closed onto the hotplate.
4. Make sure that the permanent lter is in the lter holder and that this is correctly
inserted in the device. Pour the desired amount of coffee powder into the permanent
lter. We recommend one measuring spoonful per cup.
5. Close the lid of the water reservoir.
6. Flip the On/Off switch of the coffee machine to 1. The device is switched on and the
control lamp of the On/Off switch lights up. You can cancel the brewing process at
any time by moving the On/Off switch to 0.
During the brewing process, you can remove the pot from the hotplate for a short
time to serve coffee. In this case, coffee automatically stops being ltered through.
However, the pot should not be removed from the plate for longer than 30 seconds.
7. Once the brewing process is complete, wait until the coffee has stopped dripping.
8. If the coffee is to be kept warm, leave the pot standing on the hotplate and the device
switched on. However, we recommend that you serve the coffee fresh.
9. After use, move the On/Off switch to 0. Remove the mains plug from the mains
socket.
10. Clean the coffee pot, the permanent lter and the lter holder after every use (see
the "Cleaning and Care" chapter).
Allow the device to cool down before you pour more water into the water reservoir to
brew coffee.
Tips for Producing Great-Tasting Coffee
A clean coffee pot is the requirement for making great-tasting coffee. Clean the cof-
fee machine on a regular basis. Always use fresh, cold water in the coffee machine.
01475_DE-GB-FR-NL_A5_V2.indb 2501475_DE-GB-FR-NL_A5_V2.indb 25 10.11.2014 16:09:2010.11.2014 16:09:20
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx Z 01475 - MD-213 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx Z 01475 - MD-213 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info