562000
13
Zoom out
Zoom in
Previous page
1/32
Next page
13
The connected mains cord may not pose a tripping hazard. Do not allow the cord to
hang over the edge of tables or kitchen worktops. Someone could catch him/herself
and pull down the device.
Risk of electric shock and re
Only use the device in enclosed areas.
Always place the device on a dry, level and solid surface with adequate space.
Keep a suf cient distance from heat sources, e.g. hobs, ovens and gas sources.
Choose a location for setting up the device where there is no risk of the device, the
mains cord or the mains plug falling or coming into contact with water or other liquids.
Never immerse the device in water or other liquids and never hold it under running
water. If the device does fall in water, immediately disconnect the power supply.
Never touch the cord or plug with wet hands.
Only connect the device to a properly installed socket with protective earth contacts.
The socket must also be easily accessible after the device has been connected. The
mains voltage must correspond to the technical data of the device. Only use proper
extension cords, whose technical data correspond to those of the device.
Lay the cord such that it is not crushed or creased and such that it does not come into
contact with hot surfaces.
For your health
There may be some production residues stuck to the device. Therefore, clean the de-
vice before rst use. For hygienic reasons, you should also clean the device if there
is leftover food on the cutting blade after use (see chapter “Cleaning”).
Beware of damage to the device
Only use the device once it has been properly assembled and does not exhibit any
visible damages.
If the device is defective, do not attempt to repair it yourself. In the event of damage,
contact the customer service department.
Only use the enclosed accessories from the manufacturer.
Do not allow the device to fall and do not expose it to severe percussions.
Do not subject the device to extreme temperatures, severe changes in temperature,
direct sunlight or moisture.
Do not overheat the motor! Let the device cool off after no more than 5 minutes of
continuous operation!
Before a storm or if you encounter an error during operation, pull the mains plug out
of the socket.
Always pull on the plug itself and never on the cord.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx Z 00166 - FS 996 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx Z 00166 - FS 996 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info