703183
40
Zoom out
Zoom in
Previous page
1/108
Next page
EN 40
Do not overload the device! Only chop up hard foodstuffs (e. g. ice cubes) by
pressing the PULSE button with brief pauses.
Overheating of the device! Do not allow the device to operate on speed level 2 for
longer than 2 minutes without stopping. Then let the device cool down for a short
while before it is used again.
Risk of damage to the stirring attachment! When the stirring attachment is placed
on the device, only use speed level 1.
For safety reasons, the device can only be switched on if the mixing bowl is
tted in the motor unit correctly and the mixing bowl lid or steaming attach-
ment are locked on.
To save power, the display switches to standby mode when the device is
not used for approx. 4 minutes. “stdy” appears on the display. To switch the
display back on again, press the
START / STOP button.
1. Place the motor unit on a dry, clean, at and non-heatable work surface.
2. Make sure that the suction feet stick properly to the work surface.
3. Insert the mains plug into a properly installed plug socket that is easily accessible.
4. Ensure that the cross-blade attachment is correctly xed in place in the mixing bowl.
When using additional accessories, e. g. for stirring or steaming, follow the instruc-
tions provided in “Using Accessories Correctly”.
5. Pour any ingredients you want into the mixing bowl. Do not exceed the MAX marking
in the mixing bowl!
6. Secure the mixing bowl lid on the mixing bowl and place the mixing bowl into the
motor unit. If you do not intend to boil milk, cream or pasta or steam food, close the
opening in the lid with the measuring cup that is supplied.
7. Switch on the motor unit by ipping the On / Off switch on
the back of the motor unit to the I position. A beep is heard
and the device goes into standby mode. “stdy” appears on
the display.
8. Press the
START / STOP button to activate the device.
9. Set the preparation time (max. 60 minutes): Press the
button to switch between
setting the minutes and seconds. After pressing the
button, set the preparation
time using the + and buttons
NOTE: This step can be skipped if the ingredients are only to be brie y chopped up
or mixed together and not heated using the PULSE button or ingredients are to be
weighed.
10. To heat or cook the ingredients, press the
button and use the + and buttons to
set a temperature of between 40 °C and 120 °C. The temperature can be set in incre-
ments of 20.
11. To switch the cross-blade attachment on and off, press the
button and
use the + and buttons to choose between speed level 1 and speed level 2.
NOTE: The cross-blade attachment is disabled at a temperature setting of 120 °C.
12. Press the
START / STOP button. The device starts to operate.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx HZ-S04 - 07641 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx HZ-S04 - 07641 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info