703215

Gourmetmaxx HS-R10A - Z05914 Donergrill Manual

20
Zoom out
Zoom in
Previous page
1/44
Next page
EN 20
5. Switch the device on by moving the On/Off switch (6) to Position I (On). The device
starts to heat up. The operating lamp lights up and the central spit (4) rotates. The
meat is grilled.
If the central spit (4) cannot rotate freely, you should dismantle the device and
assemble it again. Make sure that the retaining bracket (1) is fi tted correctly to the
cog of the central spit (2).
6. When the meat is brown enough, switch the device off by moving the On/Off switch (6)
to Position 0 (Off). Use a sharp knife to cut off the outer layer of the meat, and catch
the meat in a suitable container. Switch the device on again.
Repeat the procedure until all the meat has been grilled.
7. Switch the device off by moving the On/Off switch (6) to Position 0 (Off).
8. Disconnect the device from the mains power after use and allow it to cool down
before you clean it.
Grilling a whole chicken
1. Skewer the chicken vertically on the central spit. Make sure that it does not
protrude above the edge of the skewer plate.
2. Assemble the device (see the "Assembly" chapter).
3. Insert the plug into a properly installed socket.
4. Switch the device on by moving the On/Off switch (6) to Position I (On). The device
starts to heat up. The operating lamp lights up and the central spit (4) rotates. The
chicken is grilled.
If the central spit (4) cannot rotate freely, you should dismantle the device and
assemble it again. Make sure that the retaining bracket (1) is fi tted correctly to the
cog of the central spit (2).
5. Switch the device off by moving the On/Off switch (6) to Position 0 (Off).
6. Allow the device to cool down.
7. Remove the retaining bracket (see the "Assembly” chapter) and remove the grilled
chicken.
8. Disconnect the device from the mains power after use and allow it to cool down
before you clean it.
Grilling kebabs
1. Place the plastic cogs (9) on the skewers (3) from above. The smooth side of the cog
must be facing upwards and the cog has to click into place completely.
2. Place the food on the skewers (3).
3. Assemble the device (see the "Assembly" chapter).
4. Insert the base of the skewers (3) into the outer holes of the skewer plate (5).
5. Fit the handles of the skewers (3) into the outer gaps in the cog of the central spit (2).
Make sure that the plastic cog of each skewer (9) and the cog of the central spit (2)
mesh correctly.
6. Switch the device on by moving the On/Off switch (6) to Position I (On). The device
starts to heat up. The operating lamp lights up and the central spit (4) rotates. The
kebabs (3) are grilled.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx HS-R10A - Z05914 Donergrill at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx HS-R10A - Z05914 Donergrill in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info