703122
23
Zoom out
Zoom in
Previous page
1/48
Next page
23 EN
Use for preparing spritz biscuits
1. Prepare the spritz biscuit dough according to your recipe.
2. Place the motor unit (6) on an even, stable surface.
3. Insert the mincing attachment (8) and the screw conveyor (9) into the device in the
manner described in “Use for Chopping Up Meat and Fish”.
4. Place the spritz biscuits attachment onto the screw conveyor and x it with the lo-
cking nut (13). Do not overtighten!
5. Insert the baking form bar into the spritz biscuit attachment up to the required form.
Take care that you push the bar into the spritz biscuit attachment with the handle to
the front.
6. To switch on the device, move the I / 0 / R button (7) to the I (On) position.
7. Add the spritz biscuit dough in the ll chute. Use the plunger (3) to gradually push
the dough through the ll chute.
8. To switch the device off again, move the I / 0 / R button to the 0 (Off) position.
9. Remove the mains plug from the plug socket after use.
10. Divide the dough strand into equal sized parts and bake the spritz biscuits according
to recipe until done.
11. Clean the device and the used accessories after each use (see „Cleaning and Sto-
rage“).
Cleaning and Storage
PLEASE NOTE!
Remove the mains plug from the plug socket before cleaning the device.
The device and accessories are not suitable for dishwasher use.
Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
1. If you have not already done so, switch off the device and pull the mains plug out of
the plug socket.
2. Dismantle the device in the reverse order:
remove the storage bowl (4),
undo the locking nut (13),
remove the used insert,
if needed remove the cutter head,
take out the screw conveyor,
remove the mincing attachment (8) or the vegetable slicer adapter (2) by pressing
the release button (5) and turning the attachment to the right at the same time
(towards the I / 0 / R button (7)).
3. Remove any possible food residues and clean all parts (apart from the motor
unit (6)!) with warm water and mild detergent.
4. Then dry all parts thoroughly.
5. If necessary, wipe down the motor unit with a slightly damp cloth.
6. Store the device and all accessories in a clean, dry place which is not accessible to
children and animals.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gourmetmaxx AMG31B-100 - 08612 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gourmetmaxx AMG31B-100 - 08612 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info