Manual Gossen Metrawatt SECUTEST SIII (page 64 of 72) (English)

571678

Zoom out

Zoom in

1/72

64 GMC-I Messtechnik GmbH

20 RS 232 Interface

Jack RS232 is provided for the connection of the following instruments:

• (P)SI module (accessory),

which can be inserted into the lid of the tester

•PC

• Barcode scanner of the following type:

B3261 with RS232 interface (article number: GTZ3261000R0001)

Z720A with RS232 interface (article number: Z720A)

or RFID scanner of the following type:

Z751G with RS232 interface (article number: Z751G)

20.1 Transmission of Measurement Results to the (P)SI module

Test results – except for results from individual measurements and the

function test – can be transmitted from the test instrument to the (P)SI

module, where they can be stored and printed out in the form of measur-

ing, test and statistics reports at any time.

20.2 PC Connection

Connection to an IBM compatible PC is also possible. The PC is

connected to the interface at the test instrument, or to the interface

port at a previously installed (P)SI module.

20.2.1Software Evaluation of Measurement Results

Convenient software programs such as PC.doc-WORD/EXCEL, PC.doc-

ACCESS or PS3 allow for easy preparation of measuring and test reports,

as well as archiving of measured data.

20.2.2Instrument Control via Interface Commands

All key functions included with the test instrument can be simulated

with the help of interface protocols, and the following parameters can be

queried:

• Type of measurement and measuring range

• Test setup

• Measurement sequence progress

• Detailed measuring results

20.3 Interface Definition and Protocol

The interface included with the test instrument is in compliance

with the RS 232 standard.

Technical Data:

Baud Rate 9600 baud, permanently set

Character Length 8 bits

Parity none

Stop Bits 1

Data Protocol per DIN 19244

X_ON / X_OFF protocol

Connector Pin Assignments, 9-Pin Subminiature Socket Connector:

Note

A detailed description of the interface protocole is available from

our Product Support, refer to chapter 24 for contact details.

1: External in + (for internal use only)

2: TXD (transmitter output)

3: RXD (receiver input)

4: External in +

5: GROUND

6: +5 V

(500 mA output, for barcode scanner only)

7: Ext. in –

8: Control output

9: +9 V (for (P)SI module only)

876

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUTEST SIII in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt SECUTEST SIII Manual

Product: