571678

Gossen Metrawatt SECUTEST SIII Manual

58
Zoom out
Zoom in
Previous page
1/72
Next page
58 GMC-I Messtechnik GmbH
16 Storing in (P)SI Module (Accessory) and Database Operations
(Feature KB01, SECUTEST SIII+H)
16.1 Storing Measurement Data in the (P)SI Module
Upon completion of a measurement – message „Test passed/failed“ is
displayed – you can file the measurement data in the memory of the (P)SI
module.
õ Press the STORE key at the (P)SI module.
A text entry field is displayed.
õ You may now enter your comments on the measurement
and/or an ident. no.
õ Press the STORE key once more in order to save the measurement data
and your comments.
The message: „Data are being stored“ is shown on the display.
A detailed description is included in the operating instructions for your
(P)SI module in the chapter „Display, print and store protocol“.
16.2 Database Operations
16.2.1 Storing Test Results to the Test Instrument
If no (P)SI module has been connected, up to 125 reports can be stored
to the test instrument (without function test values and without comments
on DUT). The reports can be viewed as required at the instrument and can
be printed out, for example with the help of a terminal program, see chap-
ter 18.
The reports are sorted by time and date and are displayed with the ID
number. If no ID number was assigned, date and time are automatically
saved instead.
As an alternative, consecutive numbering can be selected.
16.2.2 Uploading Report Templates into Test Instrument, Reading Out From the
Test Instrument, Editing at the PC and Re-Saving to the Test Instrument
The „Test result“ menu allows for storage of up to 4 report templates in the
test instrument. Report templates are uploaded from a file at a PC to the
test instrument (“Load file”). Templates can also be uploaded from the test
instrument to a PC (“Templates from Secutest”), and then edited and re-
saved.
After completion of a test (“Passed” or “Failed” appears at the instru-
ment’s LCD), the test results are read out to one of these report templates
in the form of report data (depending upon the selector switch position or
test regulation) via the RS 232 interface. The report menu in the test in-
strument is activated with the and keys to this end. In order to read
out the report data at a PC, it is necessary to connect the SECUSTORE stor-
age adapter with the RS232 interface. The report can, for example, be
displayed with the PC analysis program WinProfi (as from version 3.06) or
ETC (as from version 1.22).
16.2.3Reading Out and Saving Test Results / Test Data from the (P)SI Module
Test results saved to the test instrument can be displayed, edited, printed
(only PSI module) or saved after reading them into a PC using the desired
report template.
Data can be processed immediately after completion of the test, or from
the database (Feature KB01, SECUTEST SIII+H). Data can be saved with or
without a report template (e.g. for further processing with PS3).
Test results saved to the (P)SI module can also be read out, printed (only
PSI module), saved or processed by means of a report template.
Easy method of printing out reports:
Activate the „test result“ menu in the update and options installation pro-
gram. When the test result is displayed in the test instrument select the
print function (press key „Cursor up“, then set the cursor on „print“ and
press ENTER).
17 Recognition of Probe to Protective Conductor
(Feature KD01, SECUTEST SIII+H)
The protective conductor measurement is expanded to include the
function: “automatic recognition of measuring point change”.
During protective conductor measurement, the instrument recognizes
whether or not the probe is in contact with the protective conductor, and
indicates these two possible conditions by means of acoustic signals.
This function is helpful if several protective conductor connections need to
be tested. The function can be activated in the “test sequence setup”
menu with “auto measuring point” (see “changes to the switch position
menu” above).
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECUTEST SIII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUTEST SIII in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info